Minimum tank size
Alabama is selected. Choose your bedrooms and press Calculate.
Drain field suitability in Baldwin County
Most rated land in Baldwin County is very limited for a standard drain field: 90% of it. Expect a site evaluation to point many lots toward a larger field, pressure distribution or an engineered system.
- 8% not limited
- 2% somewhat limited
- 85% very limited
- 6% not rated (urban land, water, pits)
Share of the soil survey area's 1,010,605 acres, by the USDA rating “ENG – Septic Tank Absorption Fields”. Ratings assume a standard gravity trench system with no site changes, so “very limited” means a conventional field needs special design, not that septic is impossible.
What limits drain fields here
The most common limiting factors in Baldwin County, as a share of all its land. One soil can have several, so the figures overlap.
High water table52% of the county
The water table rises to within 4 to 6 feet of the surface for part of the year, leaving too little dry soil to treat effluent.
Mounds, sand filters or treatment units that need less separation are common answers.
Slow-draining subsoil48% of the county
Water moves too slowly through the soil 2 to 6 feet down, so effluent can back up or surface.
Designers usually answer with a larger drain field, shallower trenches, pressure dosing or a mound.
Drains too fast38% of the county
Coarse soil at the bottom of the trench passes effluent through before it is treated, which risks groundwater.
Pretreatment units or a sand liner slow the flow and finish the treatment.
Flood-prone ground28% of the county
The soil is on ground that floods, even if rarely, and a flooded drain field stops working.
Systems are placed above flood level, with watertight tanks and backflow protection.
Poor filtering layer19% of the county
Very permeable material 2 to 5 feet down filters effluent poorly.
Pretreatment or added fill gives the effluent more treatment before it reaches that layer.
Main soils in Baldwin County
The soils and land types covering the most ground. Search your address in the USDA Web Soil Survey to see which one is on your lot.
| Soil or land type | Share of county |
|---|---|
| Lakeland | 13.5% |
| Water | 5.8% |
| Malbis | 4.8% |
| Cuthbert | 4.5% |
| Norfolk | 4.2% |
| Bowie | 3.9% |
| Plummer | 3.3% |
| Wadley | 3.2% |
Alabama tank size rules
Table 9 sets tank capacity by bedrooms, never less than 1,000 gallons, plus 500 gallons for each spa or hot tub. Ask your county health department for the Table 9 size for 4 or more bedrooms.
| Bedrooms | Minimum tank |
|---|---|
| 1 BR | 1,000 gal |
| 2 BR | 1,000 gal |
| 3 BR | 1,000 gal |
| 4 BR | Set locally |
| 5 BR | Set locally |
| 6 BR | Set locally |
Source: Ala. Admin. Code r. 420-3-1-.17 and Table 9 (420-3-1-T9).
Common questions
Can I put a conventional septic system in Baldwin County?
Often, but not everywhere. The USDA rates 10% of rated land here as not or only somewhat limited for a standard drain field and 90% as very limited. Only a site evaluation on your lot can say which you have.
What size septic tank do I need in Baldwin County?
Alabama's minimum is 1,000 gal for 3 bedrooms and set locally for 4. Your county can require more.
What is the most common septic problem with soil in Baldwin County?
High water table, a limiting factor on about 52% of the county. Mounds, sand filters or treatment units that need less separation are common answers.
More in Alabama
Sources
- https://sdmdataaccess.sc.egov.usda.gov/
- https://websoilsurvey.nrcs.usda.gov/app/
- https://www.nrcs.usda.gov/resources/data-and-reports/soil-survey-interpretations
- https://www.epa.gov/septic/types-septic-systems
- https://admincode.legislature.state.al.us/api/rule/420-3-1-.17
- https://pubs.nmsu.edu/_m/M113/