Minimum tank size
Alabama is selected. Choose your bedrooms and press Calculate.
Drain field suitability in Crenshaw County
Soils in Crenshaw County are mixed: 78% of rated land is very limited and 22% is not or only somewhat limited. The answer depends on the lot, so the soil test matters more than the county average.
- 3% not limited
- 19% somewhat limited
- 77% very limited
- 1% not rated (urban land, water, pits)
Share of the soil survey area's 352,456 acres, by the USDA rating “ENG – Septic Tank Absorption Fields”. Ratings assume a standard gravity trench system with no site changes, so “very limited” means a conventional field needs special design, not that septic is impossible.
What limits drain fields here
The most common limiting factors in Crenshaw County, as a share of all its land. One soil can have several, so the figures overlap.
Slow-draining subsoil83% of the county
Water moves too slowly through the soil 2 to 6 feet down, so effluent can back up or surface.
Designers usually answer with a larger drain field, shallower trenches, pressure dosing or a mound.
Steep slopes38% of the county
Slopes over about 8% make it hard to keep trenches level and can let effluent seep out downhill.
Trenches are laid along the contour, often with serial distribution or drip dispersal.
High water table34% of the county
The water table rises to within 4 to 6 feet of the surface for part of the year, leaving too little dry soil to treat effluent.
Mounds, sand filters or treatment units that need less separation are common answers.
Flood-prone ground21% of the county
The soil is on ground that floods, even if rarely, and a flooded drain field stops working.
Systems are placed above flood level, with watertight tanks and backflow protection.
Shallow bedrock10% of the county
Rock lies within about 3 to 6 feet of the surface, so there is little soil to filter effluent before it reaches the rock.
At-grade systems, mounds or drip dispersal add soil depth above the rock.
Main soils in Crenshaw County
The soils and land types covering the most ground. Search your address in the USDA Web Soil Survey to see which one is on your lot.
| Soil or land type | Share of county |
|---|---|
| Orangeburg | 11.1% |
| Springhill | 10.6% |
| Nankin | 9.7% |
| Lucy | 7.8% |
| Fuquay | 5.6% |
| Arundel | 5.0% |
| Luverne | 4.7% |
| Troup | 4.3% |
Alabama tank size rules
Table 9 sets tank capacity by bedrooms, never less than 1,000 gallons, plus 500 gallons for each spa or hot tub. Ask your county health department for the Table 9 size for 4 or more bedrooms.
| Bedrooms | Minimum tank |
|---|---|
| 1 BR | 1,000 gal |
| 2 BR | 1,000 gal |
| 3 BR | 1,000 gal |
| 4 BR | Set locally |
| 5 BR | Set locally |
| 6 BR | Set locally |
Source: Ala. Admin. Code r. 420-3-1-.17 and Table 9 (420-3-1-T9).
Common questions
Can I put a conventional septic system in Crenshaw County?
Often, but not everywhere. The USDA rates 22% of rated land here as not or only somewhat limited for a standard drain field and 78% as very limited. Only a site evaluation on your lot can say which you have.
What size septic tank do I need in Crenshaw County?
Alabama's minimum is 1,000 gal for 3 bedrooms and set locally for 4. Your county can require more.
What is the most common septic problem with soil in Crenshaw County?
Slow-draining subsoil, a limiting factor on about 83% of the county. Designers usually answer with a larger drain field, shallower trenches, pressure dosing or a mound.
More in Alabama
Sources
- https://sdmdataaccess.sc.egov.usda.gov/
- https://websoilsurvey.nrcs.usda.gov/app/
- https://www.nrcs.usda.gov/resources/data-and-reports/soil-survey-interpretations
- https://www.epa.gov/septic/types-septic-systems
- https://admincode.legislature.state.al.us/api/rule/420-3-1-.17
- https://pubs.nmsu.edu/_m/M113/