Septic Tank Calculator

Home / By county / Arkansas

Septic Systems in Baxter County, Arkansas

How much of Baxter County the USDA rates as suitable for a septic drain field, what usually limits it, and the tank size Arkansas requires.

Count every room that could be used as a bedroom. Most states size the tank by bedrooms, not by who lives there now.
Used only for the pumping estimate.

Minimum tank size

Arkansas is selected. Choose your bedrooms and press Calculate.

Drain field suitability in Baxter County

Most rated land in Baxter County is very limited for a standard drain field: 90% of it. Expect a site evaluation to point many lots toward a larger field, pressure distribution or an engineered system.

  • 0% not limited
  • 9% somewhat limited
  • 83% very limited
  • 8% not rated (urban land, water, pits)

Share of the soil survey area's 375,499 acres, by the USDA rating “ENG – Septic Tank Absorption Fields”. Ratings assume a standard gravity trench system with no site changes, so “very limited” means a conventional field needs special design, not that septic is impossible.

What limits drain fields here

The most common limiting factors in Baxter County, as a share of all its land. One soil can have several, so the figures overlap.

  • Slow-draining subsoil70% of the county

    Water moves too slowly through the soil 2 to 6 feet down, so effluent can back up or surface.

    Designers usually answer with a larger drain field, shallower trenches, pressure dosing or a mound.

  • Steep slopes64% of the county

    Slopes over about 8% make it hard to keep trenches level and can let effluent seep out downhill.

    Trenches are laid along the contour, often with serial distribution or drip dispersal.

  • Shallow bedrock41% of the county

    Rock lies within about 3 to 6 feet of the surface, so there is little soil to filter effluent before it reaches the rock.

    At-grade systems, mounds or drip dispersal add soil depth above the rock.

  • High water table13% of the county

    The water table rises to within 4 to 6 feet of the surface for part of the year, leaving too little dry soil to treat effluent.

    Mounds, sand filters or treatment units that need less separation are common answers.

  • Large stones12% of the county

    Stones over 3 inches make up a quarter or more of the top 16 inches, which makes trenches hard to dig and level.

    Contractors may need heavier equipment or imported fill.

Main soils in Baxter County

The soils and land types covering the most ground. Search your address in the USDA Web Soil Survey to see which one is on your lot.

Soil or land typeShare of county
Doniphan18.3%
Arkana13.2%
Moko11.2%
Nixa6.2%
Water6.1%
Gassville5.5%
Portia4.7%
Clarksville4.6%

Arkansas tank size rules

Homes with up to 3 bedrooms need 1,000 gallons and 4 bedrooms need 1,250. Add 250 gallons for each additional bedroom.

BedroomsMinimum tank
1 BR1,000 gal
2 BR1,000 gal
3 BR1,000 gal
4 BR1,250 gal
5 BR1,500 gal
6 BR1,750 gal

Source: Arkansas Dept of Health, Rules Pertaining to Onsite Wastewater Systems (2024).

All Arkansas septic rules

Common questions

Can I put a conventional septic system in Baxter County?

Often, but not everywhere. The USDA rates 10% of rated land here as not or only somewhat limited for a standard drain field and 90% as very limited. Only a site evaluation on your lot can say which you have.

What size septic tank do I need in Baxter County?

Arkansas's minimum is 1,000 gal for 3 bedrooms and 1,250 gal for 4. Your county can require more.

What is the most common septic problem with soil in Baxter County?

Slow-draining subsoil, a limiting factor on about 70% of the county. Designers usually answer with a larger drain field, shallower trenches, pressure dosing or a mound.

Sources

  • https://sdmdataaccess.sc.egov.usda.gov/
  • https://websoilsurvey.nrcs.usda.gov/app/
  • https://www.nrcs.usda.gov/resources/data-and-reports/soil-survey-interpretations
  • https://www.epa.gov/septic/types-septic-systems
  • https://Healthy.arkansas.gov/images/uploads/pdf/Septic_System_Installer_Basics.pdf
  • https://pubs.nmsu.edu/_m/M113/