Minimum tank size
Georgia is selected. Choose your bedrooms and press Calculate.
Drain field suitability in Baker and Mitchell Counties
About 51% of rated land in Baker and Mitchell Counties is not limited or only somewhat limited, so a conventional trench system is often workable once a site evaluation confirms it.
- 0% not limited
- 42% somewhat limited
- 40% very limited
- 18% not rated (urban land, water, pits)
Share of the soil survey area's 485,359 acres, by the USDA rating “ENG – Septic Tank Absorption Fields”. Ratings assume a standard gravity trench system with no site changes, so “very limited” means a conventional field needs special design, not that septic is impossible.
What limits drain fields here
The most common limiting factors in Baker and Mitchell Counties, as a share of all its land. One soil can have several, so the figures overlap.
Slow-draining subsoil79% of the county
Water moves too slowly through the soil 2 to 6 feet down, so effluent can back up or surface.
Designers usually answer with a larger drain field, shallower trenches, pressure dosing or a mound.
High water table47% of the county
The water table rises to within 4 to 6 feet of the surface for part of the year, leaving too little dry soil to treat effluent.
Mounds, sand filters or treatment units that need less separation are common answers.
Flood-prone ground8% of the county
The soil is on ground that floods, even if rarely, and a flooded drain field stops working.
Systems are placed above flood level, with watertight tanks and backflow protection.
Ponding6% of the county
Water stands on the surface for hours after rain, which saturates the drain field.
Sites are often raised with a mound or moved to higher ground on the lot.
Drains too fast4% of the county
Coarse soil at the bottom of the trench passes effluent through before it is treated, which risks groundwater.
Pretreatment units or a sand liner slow the flow and finish the treatment.
Main soils in Baker and Mitchell Counties
The soils and land types covering the most ground. Search your address in the USDA Web Soil Survey to see which one is on your lot.
| Soil or land type | Share of county |
|---|---|
| Water | 17.5% |
| Tifton | 9.8% |
| Norfolk | 9.3% |
| Wagram | 9.1% |
| Orangeburg | 7.8% |
| Troup | 6.0% |
| Grady | 5.7% |
| Lucy | 5.4% |
Georgia tank size rules
Homes with up to 4 bedrooms need 1,000 gallons. Add 250 gallons for each bedroom over 4, and 50% more when a garbage grinder is installed.
| Bedrooms | Minimum tank |
|---|---|
| 1 BR | 1,000 gal |
| 2 BR | 1,000 gal |
| 3 BR | 1,000 gal |
| 4 BR | 1,000 gal |
| 5 BR | 1,250 gal |
| 6 BR | 1,500 gal |
Source: Ga. Comp. R. & Regs. 511-3-1-.05(3).
Common questions
Can I put a conventional septic system in Baker and Mitchell Counties?
Often, but not everywhere. The USDA rates 51% of rated land here as not or only somewhat limited for a standard drain field and 49% as very limited. Only a site evaluation on your lot can say which you have.
What size septic tank do I need in Baker and Mitchell Counties?
Georgia's minimum is 1,000 gal for 3 bedrooms and 1,000 gal for 4. Your county can require more.
What is the most common septic problem with soil in Baker and Mitchell Counties?
Slow-draining subsoil, a limiting factor on about 79% of the county. Designers usually answer with a larger drain field, shallower trenches, pressure dosing or a mound.
More in Georgia
Sources
- https://sdmdataaccess.sc.egov.usda.gov/
- https://websoilsurvey.nrcs.usda.gov/app/
- https://www.nrcs.usda.gov/resources/data-and-reports/soil-survey-interpretations
- https://www.epa.gov/septic/types-septic-systems
- https://www.law.cornell.edu/regulations/georgia/Ga-Comp-R-Regs-R-511-3-1-.05
- https://pubs.nmsu.edu/_m/M113/