Septic Tank Calculator

Home / By county / Idaho

Septic Systems in Ada County, Idaho

How much of Ada County the USDA rates as suitable for a septic drain field, what usually limits it, and the tank size Idaho requires.

Count every room that could be used as a bedroom. Most states size the tank by bedrooms, not by who lives there now.
Used only for the pumping estimate.

Minimum tank size

Idaho is selected. Choose your bedrooms and press Calculate.

Drain field suitability in Ada County

Most rated land in Ada County is very limited for a standard drain field: 92% of it. Expect a site evaluation to point many lots toward a larger field, pressure distribution or an engineered system.

  • 2% not limited
  • 6% somewhat limited
  • 88% very limited
  • 4% not rated (urban land, water, pits)

Share of the soil survey area's 575,317 acres, by the USDA rating “ENG – Septic Tank Absorption Fields”. Ratings assume a standard gravity trench system with no site changes, so “very limited” means a conventional field needs special design, not that septic is impossible.

What limits drain fields here

The most common limiting factors in Ada County, as a share of all its land. One soil can have several, so the figures overlap.

  • Slow-draining subsoil62% of the county

    Water moves too slowly through the soil 2 to 6 feet down, so effluent can back up or surface.

    Designers usually answer with a larger drain field, shallower trenches, pressure dosing or a mound.

  • Hardpan or caliche47% of the county

    A cemented layer within about 3 to 6 feet blocks downward drainage.

    Trenches may be dug through the pan, or a mound placed above it.

  • Shallow bedrock36% of the county

    Rock lies within about 3 to 6 feet of the surface, so there is little soil to filter effluent before it reaches the rock.

    At-grade systems, mounds or drip dispersal add soil depth above the rock.

  • Steep slopes20% of the county

    Slopes over about 8% make it hard to keep trenches level and can let effluent seep out downhill.

    Trenches are laid along the contour, often with serial distribution or drip dispersal.

  • Drains too fast7% of the county

    Coarse soil at the bottom of the trench passes effluent through before it is treated, which risks groundwater.

    Pretreatment units or a sand liner slow the flow and finish the treatment.

Main soils in Ada County

The soils and land types covering the most ground. Search your address in the USDA Web Soil Survey to see which one is on your lot.

Soil or land typeShare of county
Chilcott9.5%
Purdam6.9%
Power5.5%
Scism4.3%
Tadpole4.0%
Elijah3.7%
Colthorp3.5%
Corder3.0%

Idaho tank size rules

Homes with 1 or 2 bedrooms need 900 gallons and 3 or 4 bedrooms need 1,000. Add 250 gallons for each bedroom over 4.

BedroomsMinimum tank
1 BR900 gal
2 BR900 gal
3 BR1,000 gal
4 BR1,000 gal
5 BR1,250 gal
6 BR1,500 gal

Source: IDAPA 58.01.03.007.07.

All Idaho septic rules

Common questions

Can I put a conventional septic system in Ada County?

Often, but not everywhere. The USDA rates 8% of rated land here as not or only somewhat limited for a standard drain field and 92% as very limited. Only a site evaluation on your lot can say which you have.

What size septic tank do I need in Ada County?

Idaho's minimum is 1,000 gal for 3 bedrooms and 1,000 gal for 4. Your county can require more.

What is the most common septic problem with soil in Ada County?

Slow-draining subsoil, a limiting factor on about 62% of the county. Designers usually answer with a larger drain field, shallower trenches, pressure dosing or a mound.

Sources

  • https://sdmdataaccess.sc.egov.usda.gov/
  • https://websoilsurvey.nrcs.usda.gov/app/
  • https://www.nrcs.usda.gov/resources/data-and-reports/soil-survey-interpretations
  • https://www.epa.gov/septic/types-septic-systems
  • https://d1tvxue8o4w0fl.cloudfront.net/regulation/idaho-administrative-code/title-idapa-58-environmental-quality-department-of/rule-580103-individualsubsurface-sewage-disposal-rules-and-rules-for-cleaning-of-septic-tanks/section-580103007-septic-tanks-design-and-construction-standards
  • https://pubs.nmsu.edu/_m/M113/