Minimum tank size
Idaho is selected. Choose your bedrooms and press Calculate.
Drain field suitability in Bonneville County Area
Soils in Bonneville County Area are mixed: 53% of rated land is very limited and 47% is not or only somewhat limited. The answer depends on the lot, so the soil test matters more than the county average.
- 1% not limited
- 40% somewhat limited
- 46% very limited
- 13% not rated (urban land, water, pits)
Share of the soil survey area's 551,163 acres, by the USDA rating “ENG – Septic Tank Absorption Fields”. Ratings assume a standard gravity trench system with no site changes, so “very limited” means a conventional field needs special design, not that septic is impossible.
What limits drain fields here
The most common limiting factors in Bonneville County Area, as a share of all its land. One soil can have several, so the figures overlap.
Slow-draining subsoil72% of the county
Water moves too slowly through the soil 2 to 6 feet down, so effluent can back up or surface.
Designers usually answer with a larger drain field, shallower trenches, pressure dosing or a mound.
Steep slopes32% of the county
Slopes over about 8% make it hard to keep trenches level and can let effluent seep out downhill.
Trenches are laid along the contour, often with serial distribution or drip dispersal.
Shallow bedrock28% of the county
Rock lies within about 3 to 6 feet of the surface, so there is little soil to filter effluent before it reaches the rock.
At-grade systems, mounds or drip dispersal add soil depth above the rock.
Large stones10% of the county
Stones over 3 inches make up a quarter or more of the top 16 inches, which makes trenches hard to dig and level.
Contractors may need heavier equipment or imported fill.
Flood-prone ground8% of the county
The soil is on ground that floods, even if rarely, and a flooded drain field stops working.
Systems are placed above flood level, with watertight tanks and backflow protection.
Main soils in Bonneville County Area
The soils and land types covering the most ground. Search your address in the USDA Web Soil Survey to see which one is on your lot.
| Soil or land type | Share of county |
|---|---|
| Pancheri | 20.9% |
| Ririe | 13.9% |
| Lava flows | 11.7% |
| Rock outcrop | 5.4% |
| Torriorthents | 5.1% |
| Tetonia | 4.4% |
| Paul | 4.0% |
| Bannock | 4.0% |
Idaho tank size rules
Homes with 1 or 2 bedrooms need 900 gallons and 3 or 4 bedrooms need 1,000. Add 250 gallons for each bedroom over 4.
| Bedrooms | Minimum tank |
|---|---|
| 1 BR | 900 gal |
| 2 BR | 900 gal |
| 3 BR | 1,000 gal |
| 4 BR | 1,000 gal |
| 5 BR | 1,250 gal |
| 6 BR | 1,500 gal |
Source: IDAPA 58.01.03.007.07.
Common questions
Can I put a conventional septic system in Bonneville County Area?
Often, but not everywhere. The USDA rates 47% of rated land here as not or only somewhat limited for a standard drain field and 53% as very limited. Only a site evaluation on your lot can say which you have.
What size septic tank do I need in Bonneville County Area?
Idaho's minimum is 1,000 gal for 3 bedrooms and 1,000 gal for 4. Your county can require more.
What is the most common septic problem with soil in Bonneville County Area?
Slow-draining subsoil, a limiting factor on about 72% of the county. Designers usually answer with a larger drain field, shallower trenches, pressure dosing or a mound.
More in Idaho
Sources
- https://sdmdataaccess.sc.egov.usda.gov/
- https://websoilsurvey.nrcs.usda.gov/app/
- https://www.nrcs.usda.gov/resources/data-and-reports/soil-survey-interpretations
- https://www.epa.gov/septic/types-septic-systems
- https://d1tvxue8o4w0fl.cloudfront.net/regulation/idaho-administrative-code/title-idapa-58-environmental-quality-department-of/rule-580103-individualsubsurface-sewage-disposal-rules-and-rules-for-cleaning-of-septic-tanks/section-580103007-septic-tanks-design-and-construction-standards
- https://pubs.nmsu.edu/_m/M113/