Minimum tank size
Idaho is selected. Choose your bedrooms and press Calculate.
Drain field suitability in Payette County
Most rated land in Payette County is very limited for a standard drain field: 94% of it. Expect a site evaluation to point many lots toward a larger field, pressure distribution or an engineered system.
- 2% not limited
- 4% somewhat limited
- 91% very limited
- 3% not rated (urban land, water, pits)
Share of the soil survey area's 229,956 acres, by the USDA rating “ENG – Septic Tank Absorption Fields”. Ratings assume a standard gravity trench system with no site changes, so “very limited” means a conventional field needs special design, not that septic is impossible.
What limits drain fields here
The most common limiting factors in Payette County, as a share of all its land. One soil can have several, so the figures overlap.
Slow-draining subsoil65% of the county
Water moves too slowly through the soil 2 to 6 feet down, so effluent can back up or surface.
Designers usually answer with a larger drain field, shallower trenches, pressure dosing or a mound.
Steep slopes56% of the county
Slopes over about 8% make it hard to keep trenches level and can let effluent seep out downhill.
Trenches are laid along the contour, often with serial distribution or drip dispersal.
Hardpan or caliche15% of the county
A cemented layer within about 3 to 6 feet blocks downward drainage.
Trenches may be dug through the pan, or a mound placed above it.
High water table10% of the county
The water table rises to within 4 to 6 feet of the surface for part of the year, leaving too little dry soil to treat effluent.
Mounds, sand filters or treatment units that need less separation are common answers.
Shallow bedrock9% of the county
Rock lies within about 3 to 6 feet of the surface, so there is little soil to filter effluent before it reaches the rock.
At-grade systems, mounds or drip dispersal add soil depth above the rock.
Main soils in Payette County
The soils and land types covering the most ground. Search your address in the USDA Web Soil Survey to see which one is on your lot.
| Soil or land type | Share of county |
|---|---|
| Haw | 12.0% |
| Lolalita | 7.5% |
| Lankbush | 7.4% |
| Greenleaf | 6.3% |
| Elijah | 5.8% |
| Saralegui | 4.7% |
| Power | 4.7% |
| Purdam | 4.3% |
Idaho tank size rules
Homes with 1 or 2 bedrooms need 900 gallons and 3 or 4 bedrooms need 1,000. Add 250 gallons for each bedroom over 4.
| Bedrooms | Minimum tank |
|---|---|
| 1 BR | 900 gal |
| 2 BR | 900 gal |
| 3 BR | 1,000 gal |
| 4 BR | 1,000 gal |
| 5 BR | 1,250 gal |
| 6 BR | 1,500 gal |
Source: IDAPA 58.01.03.007.07.
Common questions
Can I put a conventional septic system in Payette County?
Often, but not everywhere. The USDA rates 6% of rated land here as not or only somewhat limited for a standard drain field and 94% as very limited. Only a site evaluation on your lot can say which you have.
What size septic tank do I need in Payette County?
Idaho's minimum is 1,000 gal for 3 bedrooms and 1,000 gal for 4. Your county can require more.
What is the most common septic problem with soil in Payette County?
Slow-draining subsoil, a limiting factor on about 65% of the county. Designers usually answer with a larger drain field, shallower trenches, pressure dosing or a mound.
More in Idaho
Sources
- https://sdmdataaccess.sc.egov.usda.gov/
- https://websoilsurvey.nrcs.usda.gov/app/
- https://www.nrcs.usda.gov/resources/data-and-reports/soil-survey-interpretations
- https://www.epa.gov/septic/types-septic-systems
- https://d1tvxue8o4w0fl.cloudfront.net/regulation/idaho-administrative-code/title-idapa-58-environmental-quality-department-of/rule-580103-individualsubsurface-sewage-disposal-rules-and-rules-for-cleaning-of-septic-tanks/section-580103007-septic-tanks-design-and-construction-standards
- https://pubs.nmsu.edu/_m/M113/