Minimum tank size
Kansas is selected. Choose your bedrooms and press Calculate.
Drain field suitability in Barton County
Most rated land in Barton County is very limited for a standard drain field: 89% of it. Expect a site evaluation to point many lots toward a larger field, pressure distribution or an engineered system.
- 0% not limited
- 10% somewhat limited
- 87% very limited
- 3% not rated (urban land, water, pits)
Share of the soil survey area's 576,536 acres, by the USDA rating “ENG – Septic Tank Absorption Fields”. Ratings assume a standard gravity trench system with no site changes, so “very limited” means a conventional field needs special design, not that septic is impossible.
What limits drain fields here
The most common limiting factors in Barton County, as a share of all its land. One soil can have several, so the figures overlap.
Slow-draining subsoil86% of the county
Water moves too slowly through the soil 2 to 6 feet down, so effluent can back up or surface.
Designers usually answer with a larger drain field, shallower trenches, pressure dosing or a mound.
Flood-prone ground18% of the county
The soil is on ground that floods, even if rarely, and a flooded drain field stops working.
Systems are placed above flood level, with watertight tanks and backflow protection.
Drains too fast13% of the county
Coarse soil at the bottom of the trench passes effluent through before it is treated, which risks groundwater.
Pretreatment units or a sand liner slow the flow and finish the treatment.
High water table10% of the county
The water table rises to within 4 to 6 feet of the surface for part of the year, leaving too little dry soil to treat effluent.
Mounds, sand filters or treatment units that need less separation are common answers.
Shallow bedrock8% of the county
Rock lies within about 3 to 6 feet of the surface, so there is little soil to filter effluent before it reaches the rock.
At-grade systems, mounds or drip dispersal add soil depth above the rock.
Main soils in Barton County
The soils and land types covering the most ground. Search your address in the USDA Web Soil Survey to see which one is on your lot.
| Soil or land type | Share of county |
|---|---|
| Harney | 30.8% |
| Crete | 13.6% |
| Wakeen | 4.8% |
| Pratt | 4.5% |
| Hord | 4.4% |
| New Cambria | 2.9% |
| Water | 2.5% |
| Kisiwa | 2.4% |
Kansas tank size rules
Kansas guidance sizes the tank at twice the daily flow, using 150 gallons a day per bedroom, never less than 1,000 gallons: 1,000 for up to 3 bedrooms, 1,200 for 4, 1,500 for 5 and 1,800 for 6. With a garbage disposal the figures rise to 1,350, 1,800, 2,250 and 2,700. Counties adopt their own sanitary codes and can require more.
| Bedrooms | Minimum tank |
|---|---|
| 1 BR | 1,000 gal |
| 2 BR | 1,000 gal |
| 3 BR | 1,000 gal |
| 4 BR | 1,200 gal |
| 5 BR | 1,500 gal |
| 6 BR | 1,800 gal |
Source: KDHE Bulletin 4-2 (Minimum Standards for Design and Construction of Onsite Wastewater Systems); K.A.R. 28-5-6 to 9.
Common questions
Can I put a conventional septic system in Barton County?
Often, but not everywhere. The USDA rates 11% of rated land here as not or only somewhat limited for a standard drain field and 89% as very limited. Only a site evaluation on your lot can say which you have.
What size septic tank do I need in Barton County?
Kansas's minimum is 1,000 gal for 3 bedrooms and 1,200 gal for 4. Your county can require more.
What is the most common septic problem with soil in Barton County?
Slow-draining subsoil, a limiting factor on about 86% of the county. Designers usually answer with a larger drain field, shallower trenches, pressure dosing or a mound.
More in Kansas
Sources
- https://sdmdataaccess.sc.egov.usda.gov/
- https://websoilsurvey.nrcs.usda.gov/app/
- https://www.nrcs.usda.gov/resources/data-and-reports/soil-survey-interpretations
- https://www.epa.gov/septic/types-septic-systems
- https://saline.govbuilt.com/media/environmental-health/septic/requirements-for-permitting-a-septic-system-12-8-2014.pdf
- https://pubs.nmsu.edu/_m/M113/