Minimum tank size
Kansas is selected. Choose your bedrooms and press Calculate.
Drain field suitability in Meade County
Soils in Meade County are mixed: 61% of rated land is very limited and 39% is not or only somewhat limited. The answer depends on the lot, so the soil test matters more than the county average.
- 5% not limited
- 32% somewhat limited
- 59% very limited
- 5% not rated (urban land, water, pits)
Share of the soil survey area's 626,501 acres, by the USDA rating “ENG – Septic Tank Absorption Fields”. Ratings assume a standard gravity trench system with no site changes, so “very limited” means a conventional field needs special design, not that septic is impossible.
What limits drain fields here
The most common limiting factors in Meade County, as a share of all its land. One soil can have several, so the figures overlap.
Slow-draining subsoil75% of the county
Water moves too slowly through the soil 2 to 6 feet down, so effluent can back up or surface.
Designers usually answer with a larger drain field, shallower trenches, pressure dosing or a mound.
Steep slopes20% of the county
Slopes over about 8% make it hard to keep trenches level and can let effluent seep out downhill.
Trenches are laid along the contour, often with serial distribution or drip dispersal.
Shallow bedrock8% of the county
Rock lies within about 3 to 6 feet of the surface, so there is little soil to filter effluent before it reaches the rock.
At-grade systems, mounds or drip dispersal add soil depth above the rock.
Poor filtering layer6% of the county
Very permeable material 2 to 5 feet down filters effluent poorly.
Pretreatment or added fill gives the effluent more treatment before it reaches that layer.
High water table6% of the county
The water table rises to within 4 to 6 feet of the surface for part of the year, leaving too little dry soil to treat effluent.
Mounds, sand filters or treatment units that need less separation are common answers.
Main soils in Meade County
The soils and land types covering the most ground. Search your address in the USDA Web Soil Survey to see which one is on your lot.
| Soil or land type | Share of county |
|---|---|
| Harney | 27.0% |
| Mansic | 16.5% |
| Uly | 5.8% |
| Otero | 5.3% |
| Spearville | 5.0% |
| Campus | 4.8% |
| Optima | 4.5% |
| Manter | 3.0% |
Kansas tank size rules
Kansas guidance sizes the tank at twice the daily flow, using 150 gallons a day per bedroom, never less than 1,000 gallons: 1,000 for up to 3 bedrooms, 1,200 for 4, 1,500 for 5 and 1,800 for 6. With a garbage disposal the figures rise to 1,350, 1,800, 2,250 and 2,700. Counties adopt their own sanitary codes and can require more.
| Bedrooms | Minimum tank |
|---|---|
| 1 BR | 1,000 gal |
| 2 BR | 1,000 gal |
| 3 BR | 1,000 gal |
| 4 BR | 1,200 gal |
| 5 BR | 1,500 gal |
| 6 BR | 1,800 gal |
Source: KDHE Bulletin 4-2 (Minimum Standards for Design and Construction of Onsite Wastewater Systems); K.A.R. 28-5-6 to 9.
Common questions
Can I put a conventional septic system in Meade County?
Often, but not everywhere. The USDA rates 39% of rated land here as not or only somewhat limited for a standard drain field and 61% as very limited. Only a site evaluation on your lot can say which you have.
What size septic tank do I need in Meade County?
Kansas's minimum is 1,000 gal for 3 bedrooms and 1,200 gal for 4. Your county can require more.
What is the most common septic problem with soil in Meade County?
Slow-draining subsoil, a limiting factor on about 75% of the county. Designers usually answer with a larger drain field, shallower trenches, pressure dosing or a mound.
More in Kansas
Sources
- https://sdmdataaccess.sc.egov.usda.gov/
- https://websoilsurvey.nrcs.usda.gov/app/
- https://www.nrcs.usda.gov/resources/data-and-reports/soil-survey-interpretations
- https://www.epa.gov/septic/types-septic-systems
- https://saline.govbuilt.com/media/environmental-health/septic/requirements-for-permitting-a-septic-system-12-8-2014.pdf
- https://pubs.nmsu.edu/_m/M113/