Minimum tank size
Kentucky is selected. Choose your bedrooms and press Calculate.
Drain field suitability in Warren County
Soils in Warren County are mixed: 62% of rated land is very limited and 38% is not or only somewhat limited. The answer depends on the lot, so the soil test matters more than the county average.
- 0% not limited
- 32% somewhat limited
- 54% very limited
- 14% not rated (urban land, water, pits)
Share of the soil survey area's 350,495 acres, by the USDA rating “ENG – Septic Tank Absorption Fields”. Ratings assume a standard gravity trench system with no site changes, so “very limited” means a conventional field needs special design, not that septic is impossible.
What limits drain fields here
The most common limiting factors in Warren County, as a share of all its land. One soil can have several, so the figures overlap.
Slow-draining subsoil80% of the county
Water moves too slowly through the soil 2 to 6 feet down, so effluent can back up or surface.
Designers usually answer with a larger drain field, shallower trenches, pressure dosing or a mound.
Steep slopes55% of the county
Slopes over about 8% make it hard to keep trenches level and can let effluent seep out downhill.
Trenches are laid along the contour, often with serial distribution or drip dispersal.
Shallow bedrock24% of the county
Rock lies within about 3 to 6 feet of the surface, so there is little soil to filter effluent before it reaches the rock.
At-grade systems, mounds or drip dispersal add soil depth above the rock.
High water table13% of the county
The water table rises to within 4 to 6 feet of the surface for part of the year, leaving too little dry soil to treat effluent.
Mounds, sand filters or treatment units that need less separation are common answers.
Flood-prone ground7% of the county
The soil is on ground that floods, even if rarely, and a flooded drain field stops working.
Systems are placed above flood level, with watertight tanks and backflow protection.
Main soils in Warren County
The soils and land types covering the most ground. Search your address in the USDA Web Soil Survey to see which one is on your lot.
| Soil or land type | Share of county |
|---|---|
| Baxter | 20.5% |
| Crider | 16.5% |
| Caneyville | 6.7% |
| Frondorf | 5.1% |
| Zanesville | 4.9% |
| Ramsey | 4.7% |
| Fredonia | 4.2% |
| Nolin | 3.9% |
Kentucky tank size rules
Homes with up to 3 bedrooms need 1,000 gallons, 4 bedrooms 1,250 and 5 bedrooms 1,500. Add 250 gallons for each additional bedroom, and 250 more with a garbage disposal.
| Bedrooms | Minimum tank |
|---|---|
| 1 BR | 1,000 gal |
| 2 BR | 1,000 gal |
| 3 BR | 1,000 gal |
| 4 BR | 1,250 gal |
| 5 BR | 1,500 gal |
| 6 BR | 1,750 gal |
Source: 902 KAR 10:085, Table 2.
Common questions
Can I put a conventional septic system in Warren County?
Often, but not everywhere. The USDA rates 38% of rated land here as not or only somewhat limited for a standard drain field and 62% as very limited. Only a site evaluation on your lot can say which you have.
What size septic tank do I need in Warren County?
Kentucky's minimum is 1,000 gal for 3 bedrooms and 1,250 gal for 4. Your county can require more.
What is the most common septic problem with soil in Warren County?
Slow-draining subsoil, a limiting factor on about 80% of the county. Designers usually answer with a larger drain field, shallower trenches, pressure dosing or a mound.
More in Kentucky
Sources
- https://sdmdataaccess.sc.egov.usda.gov/
- https://websoilsurvey.nrcs.usda.gov/app/
- https://www.nrcs.usda.gov/resources/data-and-reports/soil-survey-interpretations
- https://www.epa.gov/septic/types-septic-systems
- https://apps.legislature.ky.gov/law/kar/downloads/docs/8806/document.engrossed.pdf
- https://pubs.nmsu.edu/_m/M113/