Minimum tank size
Maryland is selected. Choose your bedrooms and press Calculate.
Drain field suitability in Frederick County
Soils in Frederick County are mixed: 76% of rated land is very limited and 24% is not or only somewhat limited. The answer depends on the lot, so the soil test matters more than the county average.
- 1% not limited
- 23% somewhat limited
- 74% very limited
- 1% not rated (urban land, water, pits)
Share of the soil survey area's 427,098 acres, by the USDA rating “ENG – Septic Tank Absorption Fields”. Ratings assume a standard gravity trench system with no site changes, so “very limited” means a conventional field needs special design, not that septic is impossible.
What limits drain fields here
The most common limiting factors in Frederick County, as a share of all its land. One soil can have several, so the figures overlap.
Shallow bedrock61% of the county
Rock lies within about 3 to 6 feet of the surface, so there is little soil to filter effluent before it reaches the rock.
At-grade systems, mounds or drip dispersal add soil depth above the rock.
Slow-draining subsoil59% of the county
Water moves too slowly through the soil 2 to 6 feet down, so effluent can back up or surface.
Designers usually answer with a larger drain field, shallower trenches, pressure dosing or a mound.
Steep slopes42% of the county
Slopes over about 8% make it hard to keep trenches level and can let effluent seep out downhill.
Trenches are laid along the contour, often with serial distribution or drip dispersal.
Drains too fast34% of the county
Coarse soil at the bottom of the trench passes effluent through before it is treated, which risks groundwater.
Pretreatment units or a sand liner slow the flow and finish the treatment.
High water table29% of the county
The water table rises to within 4 to 6 feet of the surface for part of the year, leaving too little dry soil to treat effluent.
Mounds, sand filters or treatment units that need less separation are common answers.
Main soils in Frederick County
The soils and land types covering the most ground. Search your address in the USDA Web Soil Survey to see which one is on your lot.
| Soil or land type | Share of county |
|---|---|
| Mt. Airy | 6.1% |
| Penn | 5.7% |
| Myersville | 5.1% |
| Highfield | 4.9% |
| Glenelg | 3.8% |
| Spoolsville | 3.3% |
| Klinesville | 3.0% |
| Ravenrock | 2.8% |
Maryland tank size rules
Homes with up to 3 bedrooms need 1,000 gallons and 4 bedrooms need 1,250. Add 250 gallons for each additional bedroom.
| Bedrooms | Minimum tank |
|---|---|
| 1 BR | 1,000 gal |
| 2 BR | 1,000 gal |
| 3 BR | 1,000 gal |
| 4 BR | 1,250 gal |
| 5 BR | 1,500 gal |
| 6 BR | 1,750 gal |
Source: COMAR 26.04.02.05.
Common questions
Can I put a conventional septic system in Frederick County?
Often, but not everywhere. The USDA rates 24% of rated land here as not or only somewhat limited for a standard drain field and 76% as very limited. Only a site evaluation on your lot can say which you have.
What size septic tank do I need in Frederick County?
Maryland's minimum is 1,000 gal for 3 bedrooms and 1,250 gal for 4. Your county can require more.
What is the most common septic problem with soil in Frederick County?
Shallow bedrock, a limiting factor on about 61% of the county. At-grade systems, mounds or drip dispersal add soil depth above the rock.
More in Maryland
Sources
- https://sdmdataaccess.sc.egov.usda.gov/
- https://websoilsurvey.nrcs.usda.gov/app/
- https://www.nrcs.usda.gov/resources/data-and-reports/soil-survey-interpretations
- https://www.epa.gov/septic/types-septic-systems
- https://dsd.maryland.gov/regulations/Pages/26.04.02.05.aspx
- https://pubs.nmsu.edu/_m/M113/