Septic Tank Calculator

Home / By county / Montana

Septic Systems in Phillips County Area, Montana

How much of Phillips County Area the USDA rates as suitable for a septic drain field, what usually limits it, and the tank size Montana requires.

Count every room that could be used as a bedroom. Most states size the tank by bedrooms, not by who lives there now.
Used only for the pumping estimate.

Minimum tank size

Montana is selected. Choose your bedrooms and press Calculate.

Drain field suitability in Phillips County Area

Most rated land in Phillips County Area is very limited for a standard drain field: 86% of it. Expect a site evaluation to point many lots toward a larger field, pressure distribution or an engineered system.

  • 9% not limited
  • 4% somewhat limited
  • 83% very limited
  • 3% not rated (urban land, water, pits)

Share of the soil survey area's 3,212,198 acres, by the USDA rating “ENG – Septic Tank Absorption Fields”. Ratings assume a standard gravity trench system with no site changes, so “very limited” means a conventional field needs special design, not that septic is impossible.

What limits drain fields here

The most common limiting factors in Phillips County Area, as a share of all its land. One soil can have several, so the figures overlap.

  • Slow-draining subsoil72% of the county

    Water moves too slowly through the soil 2 to 6 feet down, so effluent can back up or surface.

    Designers usually answer with a larger drain field, shallower trenches, pressure dosing or a mound.

  • Steep slopes36% of the county

    Slopes over about 8% make it hard to keep trenches level and can let effluent seep out downhill.

    Trenches are laid along the contour, often with serial distribution or drip dispersal.

  • Shallow bedrock20% of the county

    Rock lies within about 3 to 6 feet of the surface, so there is little soil to filter effluent before it reaches the rock.

    At-grade systems, mounds or drip dispersal add soil depth above the rock.

  • Flood-prone ground7% of the county

    The soil is on ground that floods, even if rarely, and a flooded drain field stops working.

    Systems are placed above flood level, with watertight tanks and backflow protection.

  • High water table2% of the county

    The water table rises to within 4 to 6 feet of the surface for part of the year, leaving too little dry soil to treat effluent.

    Mounds, sand filters or treatment units that need less separation are common answers.

Main soils in Phillips County Area

The soils and land types covering the most ground. Search your address in the USDA Web Soil Survey to see which one is on your lot.

Soil or land typeShare of county
Kevin8.8%
Phillips7.2%
Scobey7.0%
Neldore6.9%
Elloam5.6%
Hillon4.8%
Bascovy3.9%
Absher3.8%

Montana tank size rules

Homes with up to 3 bedrooms need 1,000 gallons, 4 or 5 bedrooms 1,500 and 6 or 7 bedrooms 2,000. Above 7 bedrooms, add 250 gallons per bedroom.

BedroomsMinimum tank
1 BR1,000 gal
2 BR1,000 gal
3 BR1,000 gal
4 BR1,500 gal
5 BR1,500 gal
6 BR2,000 gal

Source: Montana DEQ Circular DEQ-4 (2023), 5.1.6.2.A.

All Montana septic rules

Common questions

Can I put a conventional septic system in Phillips County Area?

Often, but not everywhere. The USDA rates 14% of rated land here as not or only somewhat limited for a standard drain field and 86% as very limited. Only a site evaluation on your lot can say which you have.

What size septic tank do I need in Phillips County Area?

Montana's minimum is 1,000 gal for 3 bedrooms and 1,500 gal for 4. Your county can require more.

What is the most common septic problem with soil in Phillips County Area?

Slow-draining subsoil, a limiting factor on about 72% of the county. Designers usually answer with a larger drain field, shallower trenches, pressure dosing or a mound.

Sources

  • https://sdmdataaccess.sc.egov.usda.gov/
  • https://websoilsurvey.nrcs.usda.gov/app/
  • https://www.nrcs.usda.gov/resources/data-and-reports/soil-survey-interpretations
  • https://www.epa.gov/septic/types-septic-systems
  • https://deq.mt.gov/files/Water/WQInfo/Documents/Subdivisions/DEQ-4-2023.pdf
  • https://pubs.nmsu.edu/_m/M113/