Septic Tank Calculator

Home / By county / Montana

Septic Systems in Roosevelt and Daniels Counties, Montana

How much of Roosevelt and Daniels Counties the USDA rates as suitable for a septic drain field, what usually limits it, and the tank size Montana requires.

Count every room that could be used as a bedroom. Most states size the tank by bedrooms, not by who lives there now.
Used only for the pumping estimate.

Minimum tank size

Montana is selected. Choose your bedrooms and press Calculate.

Drain field suitability in Roosevelt and Daniels Counties

Most rated land in Roosevelt and Daniels Counties is very limited for a standard drain field: 89% of it. Expect a site evaluation to point many lots toward a larger field, pressure distribution or an engineered system.

  • 0% not limited
  • 10% somewhat limited
  • 84% very limited
  • 6% not rated (urban land, water, pits)

Share of the soil survey area's 2,430,599 acres, by the USDA rating “ENG – Septic Tank Absorption Fields”. Ratings assume a standard gravity trench system with no site changes, so “very limited” means a conventional field needs special design, not that septic is impossible.

What limits drain fields here

The most common limiting factors in Roosevelt and Daniels Counties, as a share of all its land. One soil can have several, so the figures overlap.

  • Slow-draining subsoil70% of the county

    Water moves too slowly through the soil 2 to 6 feet down, so effluent can back up or surface.

    Designers usually answer with a larger drain field, shallower trenches, pressure dosing or a mound.

  • Steep slopes26% of the county

    Slopes over about 8% make it hard to keep trenches level and can let effluent seep out downhill.

    Trenches are laid along the contour, often with serial distribution or drip dispersal.

  • Drains too fast20% of the county

    Coarse soil at the bottom of the trench passes effluent through before it is treated, which risks groundwater.

    Pretreatment units or a sand liner slow the flow and finish the treatment.

  • Poor filtering layer16% of the county

    Very permeable material 2 to 5 feet down filters effluent poorly.

    Pretreatment or added fill gives the effluent more treatment before it reaches that layer.

  • Shallow bedrock7% of the county

    Rock lies within about 3 to 6 feet of the surface, so there is little soil to filter effluent before it reaches the rock.

    At-grade systems, mounds or drip dispersal add soil depth above the rock.

Main soils in Roosevelt and Daniels Counties

The soils and land types covering the most ground. Search your address in the USDA Web Soil Survey to see which one is on your lot.

Soil or land typeShare of county
Zahill16.8%
Vida13.0%
Turner9.1%
Cherry3.7%
Farnuf3.6%
Farland3.6%
Williams3.6%
Dooley3.4%

Montana tank size rules

Homes with up to 3 bedrooms need 1,000 gallons, 4 or 5 bedrooms 1,500 and 6 or 7 bedrooms 2,000. Above 7 bedrooms, add 250 gallons per bedroom.

BedroomsMinimum tank
1 BR1,000 gal
2 BR1,000 gal
3 BR1,000 gal
4 BR1,500 gal
5 BR1,500 gal
6 BR2,000 gal

Source: Montana DEQ Circular DEQ-4 (2023), 5.1.6.2.A.

All Montana septic rules

Common questions

Can I put a conventional septic system in Roosevelt and Daniels Counties?

Often, but not everywhere. The USDA rates 11% of rated land here as not or only somewhat limited for a standard drain field and 89% as very limited. Only a site evaluation on your lot can say which you have.

What size septic tank do I need in Roosevelt and Daniels Counties?

Montana's minimum is 1,000 gal for 3 bedrooms and 1,500 gal for 4. Your county can require more.

What is the most common septic problem with soil in Roosevelt and Daniels Counties?

Slow-draining subsoil, a limiting factor on about 70% of the county. Designers usually answer with a larger drain field, shallower trenches, pressure dosing or a mound.

Sources

  • https://sdmdataaccess.sc.egov.usda.gov/
  • https://websoilsurvey.nrcs.usda.gov/app/
  • https://www.nrcs.usda.gov/resources/data-and-reports/soil-survey-interpretations
  • https://www.epa.gov/septic/types-septic-systems
  • https://deq.mt.gov/files/Water/WQInfo/Documents/Subdivisions/DEQ-4-2023.pdf
  • https://pubs.nmsu.edu/_m/M113/