Septic Tank Calculator

Home / By county / New York

Septic Systems in Kings County, New York

How much of Kings County the USDA rates as suitable for a septic drain field, what usually limits it, and the tank size New York requires.

Count every room that could be used as a bedroom. Most states size the tank by bedrooms, not by who lives there now.
Used only for the pumping estimate.

Minimum tank size

New York is selected. Choose your bedrooms and press Calculate.

Drain field suitability in Kings County

Most rated land in Kings County is very limited for a standard drain field: 92% of it. Expect a site evaluation to point many lots toward a larger field, pressure distribution or an engineered system.

  • 0% not limited
  • 6% somewhat limited
  • 73% very limited
  • 21% not rated (urban land, water, pits)

Share of the soil survey area's 56,599 acres, by the USDA rating “ENG – Septic Tank Absorption Fields”. Ratings assume a standard gravity trench system with no site changes, so “very limited” means a conventional field needs special design, not that septic is impossible.

What limits drain fields here

The most common limiting factors in Kings County, as a share of all its land. One soil can have several, so the figures overlap.

  • Drains too fast78% of the county

    Coarse soil at the bottom of the trench passes effluent through before it is treated, which risks groundwater.

    Pretreatment units or a sand liner slow the flow and finish the treatment.

  • High water table21% of the county

    The water table rises to within 4 to 6 feet of the surface for part of the year, leaving too little dry soil to treat effluent.

    Mounds, sand filters or treatment units that need less separation are common answers.

  • Poor filtering layer16% of the county

    Very permeable material 2 to 5 feet down filters effluent poorly.

    Pretreatment or added fill gives the effluent more treatment before it reaches that layer.

  • Slow-draining subsoil15% of the county

    Water moves too slowly through the soil 2 to 6 feet down, so effluent can back up or surface.

    Designers usually answer with a larger drain field, shallower trenches, pressure dosing or a mound.

  • Flood-prone ground12% of the county

    The soil is on ground that floods, even if rarely, and a flooded drain field stops working.

    Systems are placed above flood level, with watertight tanks and backflow protection.

Main soils in Kings County

The soils and land types covering the most ground. Search your address in the USDA Web Soil Survey to see which one is on your lot.

Soil or land typeShare of county
Urban land55.3%
Water10.1%
Nagunt8.2%
Greenbelt4.2%
Flatbush3.1%
Bigapple1.8%
Verrazano1.2%
Freshkills0.7%

New York tank size rules

Homes with up to 3 bedrooms need 1,000 gallons, 4 bedrooms 1,250, 5 bedrooms 1,500 and 6 bedrooms 1,750. Add 250 gallons for each bedroom beyond 6. An expansion attic counts as a bedroom.

BedroomsMinimum tank
1 BR1,000 gal
2 BR1,000 gal
3 BR1,000 gal
4 BR1,250 gal
5 BR1,500 gal
6 BR1,750 gal

Source: 10 NYCRR Appendix 75-A.6, Table 3.

All New York septic rules

Common questions

Can I put a conventional septic system in Kings County?

Often, but not everywhere. The USDA rates 8% of rated land here as not or only somewhat limited for a standard drain field and 92% as very limited. Only a site evaluation on your lot can say which you have.

What size septic tank do I need in Kings County?

New York's minimum is 1,000 gal for 3 bedrooms and 1,250 gal for 4. Your county can require more.

What is the most common septic problem with soil in Kings County?

Drains too fast, a limiting factor on about 78% of the county. Pretreatment units or a sand liner slow the flow and finish the treatment.

Sources

  • https://sdmdataaccess.sc.egov.usda.gov/
  • https://websoilsurvey.nrcs.usda.gov/app/
  • https://www.nrcs.usda.gov/resources/data-and-reports/soil-survey-interpretations
  • https://www.epa.gov/septic/types-septic-systems
  • https://regs.health.ny.gov/node/45071
  • https://pubs.nmsu.edu/_m/M113/