Minimum tank size
Oregon is selected. Choose your bedrooms and press Calculate.
Drain field suitability in Lake County, Northern Part, Parts of Lake and Klamath Counties
Most rated land in Lake County, Northern Part, Parts of Lake and Klamath Counties is very limited for a standard drain field: 88% of it. Expect a site evaluation to point many lots toward a larger field, pressure distribution or an engineered system.
- 2% not limited
- 10% somewhat limited
- 85% very limited
- 3% not rated (urban land, water, pits)
Share of the soil survey area's 2,716,376 acres, by the USDA rating “ENG – Septic Tank Absorption Fields”. Ratings assume a standard gravity trench system with no site changes, so “very limited” means a conventional field needs special design, not that septic is impossible.
What limits drain fields here
The most common limiting factors in Lake County, Northern Part, Parts of Lake and Klamath Counties, as a share of all its land. One soil can have several, so the figures overlap.
Shallow bedrock63% of the county
Rock lies within about 3 to 6 feet of the surface, so there is little soil to filter effluent before it reaches the rock.
At-grade systems, mounds or drip dispersal add soil depth above the rock.
Hardpan or caliche33% of the county
A cemented layer within about 3 to 6 feet blocks downward drainage.
Trenches may be dug through the pan, or a mound placed above it.
Slow-draining subsoil27% of the county
Water moves too slowly through the soil 2 to 6 feet down, so effluent can back up or surface.
Designers usually answer with a larger drain field, shallower trenches, pressure dosing or a mound.
Drains too fast22% of the county
Coarse soil at the bottom of the trench passes effluent through before it is treated, which risks groundwater.
Pretreatment units or a sand liner slow the flow and finish the treatment.
Steep slopes16% of the county
Slopes over about 8% make it hard to keep trenches level and can let effluent seep out downhill.
Trenches are laid along the contour, often with serial distribution or drip dispersal.
Main soils in Lake County, Northern Part, Parts of Lake and Klamath Counties
The soils and land types covering the most ground. Search your address in the USDA Web Soil Survey to see which one is on your lot.
| Soil or land type | Share of county |
|---|---|
| Raz | 6.7% |
| Brace | 4.3% |
| Moonbeam | 4.0% |
| Goodtack | 3.1% |
| Morehouse | 2.3% |
| Rabbithills | 2.1% |
| Wanoga | 1.9% |
| Enko | 1.9% |
Oregon tank size rules
Homes with up to 4 bedrooms need at least 1,000 gallons, and larger homes at least 1,500. The permitting agent may require a larger tank.
| Bedrooms | Minimum tank |
|---|---|
| 1 BR | 1,000 gal |
| 2 BR | 1,000 gal |
| 3 BR | 1,000 gal |
| 4 BR | 1,000 gal |
| 5 BR | 1,500 gal |
| 6 BR | 1,500 gal |
Source: OAR 340-071-0220(3).
Common questions
Can I put a conventional septic system in Lake County, Northern Part, Parts of Lake and Klamath Counties?
Often, but not everywhere. The USDA rates 12% of rated land here as not or only somewhat limited for a standard drain field and 88% as very limited. Only a site evaluation on your lot can say which you have.
What size septic tank do I need in Lake County, Northern Part, Parts of Lake and Klamath Counties?
Oregon's minimum is 1,000 gal for 3 bedrooms and 1,000 gal for 4. Your county can require more.
What is the most common septic problem with soil in Lake County, Northern Part, Parts of Lake and Klamath Counties?
Shallow bedrock, a limiting factor on about 63% of the county. At-grade systems, mounds or drip dispersal add soil depth above the rock.
More in Oregon
Sources
- https://sdmdataaccess.sc.egov.usda.gov/
- https://websoilsurvey.nrcs.usda.gov/app/
- https://www.nrcs.usda.gov/resources/data-and-reports/soil-survey-interpretations
- https://www.epa.gov/septic/types-septic-systems
- https://regulations.justia.com/states/oregon/chapter-340/division-71/section-340-071-0220/
- https://pubs.nmsu.edu/_m/M113/