Septic Tank Calculator

Home / By county / Utah

Septic Systems in Summit Area, Parts of Summit, Salt Lake and Wasatch Counties, Utah

How much of Summit Area, Parts of Summit, Salt Lake and Wasatch Counties the USDA rates as suitable for a septic drain field, what usually limits it, and the tank size Utah requires.

Count every room that could be used as a bedroom. Most states size the tank by bedrooms, not by who lives there now.
Used only for the pumping estimate.

Minimum tank size

Utah is selected. Choose your bedrooms and press Calculate.

Drain field suitability in Summit Area, Parts of Summit, Salt Lake and Wasatch Counties

Most rated land in Summit Area, Parts of Summit, Salt Lake and Wasatch Counties is very limited for a standard drain field: 95% of it. Expect a site evaluation to point many lots toward a larger field, pressure distribution or an engineered system.

  • 0% not limited
  • 5% somewhat limited
  • 90% very limited
  • 6% not rated (urban land, water, pits)

Share of the soil survey area's 725,876 acres, by the USDA rating “ENG – Septic Tank Absorption Fields”. Ratings assume a standard gravity trench system with no site changes, so “very limited” means a conventional field needs special design, not that septic is impossible.

What limits drain fields here

The most common limiting factors in Summit Area, Parts of Summit, Salt Lake and Wasatch Counties, as a share of all its land. One soil can have several, so the figures overlap.

  • Slow-draining subsoil83% of the county

    Water moves too slowly through the soil 2 to 6 feet down, so effluent can back up or surface.

    Designers usually answer with a larger drain field, shallower trenches, pressure dosing or a mound.

  • Steep slopes81% of the county

    Slopes over about 8% make it hard to keep trenches level and can let effluent seep out downhill.

    Trenches are laid along the contour, often with serial distribution or drip dispersal.

  • Shallow bedrock38% of the county

    Rock lies within about 3 to 6 feet of the surface, so there is little soil to filter effluent before it reaches the rock.

    At-grade systems, mounds or drip dispersal add soil depth above the rock.

  • Large stones21% of the county

    Stones over 3 inches make up a quarter or more of the top 16 inches, which makes trenches hard to dig and level.

    Contractors may need heavier equipment or imported fill.

  • High water table6% of the county

    The water table rises to within 4 to 6 feet of the surface for part of the year, leaving too little dry soil to treat effluent.

    Mounds, sand filters or treatment units that need less separation are common answers.

Main soils in Summit Area, Parts of Summit, Salt Lake and Wasatch Counties

The soils and land types covering the most ground. Search your address in the USDA Web Soil Survey to see which one is on your lot.

Soil or land typeShare of county
Fewkes9.1%
Skutum8.6%
Hades5.7%
Lucky Star4.8%
Rock outcrop4.2%
Heiners3.9%
Duchesne3.9%
Ant Flat3.5%

Utah tank size rules

Homes with up to 3 bedrooms need 1,000 gallons and 4 bedrooms 1,250. Add 250 gallons for each bedroom over 4. An unfinished basement counts as at least one more bedroom.

BedroomsMinimum tank
1 BR1,000 gal
2 BR1,000 gal
3 BR1,000 gal
4 BR1,250 gal
5 BR1,500 gal
6 BR1,750 gal

Source: Utah Admin. Code R317-4-6(7)(b) (eff. 6/29/2023).

All Utah septic rules

Common questions

Can I put a conventional septic system in Summit Area, Parts of Summit, Salt Lake and Wasatch Counties?

Often, but not everywhere. The USDA rates 5% of rated land here as not or only somewhat limited for a standard drain field and 95% as very limited. Only a site evaluation on your lot can say which you have.

What size septic tank do I need in Summit Area, Parts of Summit, Salt Lake and Wasatch Counties?

Utah's minimum is 1,000 gal for 3 bedrooms and 1,250 gal for 4. Your county can require more.

What is the most common septic problem with soil in Summit Area, Parts of Summit, Salt Lake and Wasatch Counties?

Slow-draining subsoil, a limiting factor on about 83% of the county. Designers usually answer with a larger drain field, shallower trenches, pressure dosing or a mound.

Sources

  • https://sdmdataaccess.sc.egov.usda.gov/
  • https://websoilsurvey.nrcs.usda.gov/app/
  • https://www.nrcs.usda.gov/resources/data-and-reports/soil-survey-interpretations
  • https://www.epa.gov/septic/types-septic-systems
  • https://www.law.cornell.edu/regulations/utah/Utah-Admin-Code-R317-4-6
  • https://pubs.nmsu.edu/_m/M113/