Septic Tank Calculator

Home / By county / Washington

Septic Systems in Benton County Area, Washington

How much of Benton County Area the USDA rates as suitable for a septic drain field, what usually limits it, and the tank size Washington requires.

Count every room that could be used as a bedroom. Most states size the tank by bedrooms, not by who lives there now.
Used only for the pumping estimate.

Minimum tank size

Washington is selected. Choose your bedrooms and press Calculate.

Drain field suitability in Benton County Area

About 55% of rated land in Benton County Area is not limited or only somewhat limited, so a conventional trench system is often workable once a site evaluation confirms it.

  • 3% not limited
  • 50% somewhat limited
  • 44% very limited
  • 3% not rated (urban land, water, pits)

Share of the soil survey area's 799,551 acres, by the USDA rating “ENG – Septic Tank Absorption Fields”. Ratings assume a standard gravity trench system with no site changes, so “very limited” means a conventional field needs special design, not that septic is impossible.

What limits drain fields here

The most common limiting factors in Benton County Area, as a share of all its land. One soil can have several, so the figures overlap.

  • Slow-draining subsoil75% of the county

    Water moves too slowly through the soil 2 to 6 feet down, so effluent can back up or surface.

    Designers usually answer with a larger drain field, shallower trenches, pressure dosing or a mound.

  • Steep slopes32% of the county

    Slopes over about 8% make it hard to keep trenches level and can let effluent seep out downhill.

    Trenches are laid along the contour, often with serial distribution or drip dispersal.

  • Poor filtering layer11% of the county

    Very permeable material 2 to 5 feet down filters effluent poorly.

    Pretreatment or added fill gives the effluent more treatment before it reaches that layer.

  • Hardpan or caliche9% of the county

    A cemented layer within about 3 to 6 feet blocks downward drainage.

    Trenches may be dug through the pan, or a mound placed above it.

  • Shallow bedrock6% of the county

    Rock lies within about 3 to 6 feet of the surface, so there is little soil to filter effluent before it reaches the rock.

    At-grade systems, mounds or drip dispersal add soil depth above the rock.

Main soils in Benton County Area

The soils and land types covering the most ground. Search your address in the USDA Web Soil Survey to see which one is on your lot.

Soil or land typeShare of county
Ritzville26.0%
Warden21.6%
Shano8.2%
Hezel6.6%
Quincy6.0%
Kiona4.2%
Willis3.9%
Burbank3.1%

Washington tank size rules

Homes with up to 4 bedrooms need 1,000 gallons. Add 250 gallons for each additional bedroom.

BedroomsMinimum tank
1 BR1,000 gal
2 BR1,000 gal
3 BR1,000 gal
4 BR1,000 gal
5 BR1,250 gal
6 BR1,500 gal

Source: WAC 246-272A-0232, Table VII.

All Washington septic rules

Common questions

Can I put a conventional septic system in Benton County Area?

Often, but not everywhere. The USDA rates 55% of rated land here as not or only somewhat limited for a standard drain field and 45% as very limited. Only a site evaluation on your lot can say which you have.

What size septic tank do I need in Benton County Area?

Washington's minimum is 1,000 gal for 3 bedrooms and 1,000 gal for 4. Your county can require more.

What is the most common septic problem with soil in Benton County Area?

Slow-draining subsoil, a limiting factor on about 75% of the county. Designers usually answer with a larger drain field, shallower trenches, pressure dosing or a mound.

Sources

  • https://sdmdataaccess.sc.egov.usda.gov/
  • https://websoilsurvey.nrcs.usda.gov/app/
  • https://www.nrcs.usda.gov/resources/data-and-reports/soil-survey-interpretations
  • https://www.epa.gov/septic/types-septic-systems
  • https://lawfilesext.leg.wa.gov/Law/WAC/WAC%20246%20%20TITLE/WAC%20246%20-272A%20CHAPTER/WAC%20246%20-272A-0232.htm
  • https://pubs.nmsu.edu/_m/M113/