Septic Tank Calculator

Home / By county / Washington

Septic Systems in Franklin County, Washington

How much of Franklin County the USDA rates as suitable for a septic drain field, what usually limits it, and the tank size Washington requires.

Count every room that could be used as a bedroom. Most states size the tank by bedrooms, not by who lives there now.
Used only for the pumping estimate.

Minimum tank size

Washington is selected. Choose your bedrooms and press Calculate.

Drain field suitability in Franklin County

Soils in Franklin County are mixed: 60% of rated land is very limited and 40% is not or only somewhat limited. The answer depends on the lot, so the soil test matters more than the county average.

  • 2% not limited
  • 32% somewhat limited
  • 51% very limited
  • 14% not rated (urban land, water, pits)

Share of the soil survey area's 759,910 acres, by the USDA rating “ENG – Septic Tank Absorption Fields”. Ratings assume a standard gravity trench system with no site changes, so “very limited” means a conventional field needs special design, not that septic is impossible.

What limits drain fields here

The most common limiting factors in Franklin County, as a share of all its land. One soil can have several, so the figures overlap.

  • Slow-draining subsoil58% of the county

    Water moves too slowly through the soil 2 to 6 feet down, so effluent can back up or surface.

    Designers usually answer with a larger drain field, shallower trenches, pressure dosing or a mound.

  • Steep slopes28% of the county

    Slopes over about 8% make it hard to keep trenches level and can let effluent seep out downhill.

    Trenches are laid along the contour, often with serial distribution or drip dispersal.

  • Poor filtering layer19% of the county

    Very permeable material 2 to 5 feet down filters effluent poorly.

    Pretreatment or added fill gives the effluent more treatment before it reaches that layer.

  • Shallow bedrock13% of the county

    Rock lies within about 3 to 6 feet of the surface, so there is little soil to filter effluent before it reaches the rock.

    At-grade systems, mounds or drip dispersal add soil depth above the rock.

  • Drains too fast3% of the county

    Coarse soil at the bottom of the trench passes effluent through before it is treated, which risks groundwater.

    Pretreatment units or a sand liner slow the flow and finish the treatment.

Main soils in Franklin County

The soils and land types covering the most ground. Search your address in the USDA Web Soil Survey to see which one is on your lot.

Soil or land typeShare of county
Quincy18.3%
Ritzville17.8%
Shano5.4%
Warden5.1%
Sagehill4.7%
Roloff3.7%
Starbuck2.9%
Prosser2.9%

Washington tank size rules

Homes with up to 4 bedrooms need 1,000 gallons. Add 250 gallons for each additional bedroom.

BedroomsMinimum tank
1 BR1,000 gal
2 BR1,000 gal
3 BR1,000 gal
4 BR1,000 gal
5 BR1,250 gal
6 BR1,500 gal

Source: WAC 246-272A-0232, Table VII.

All Washington septic rules

Common questions

Can I put a conventional septic system in Franklin County?

Often, but not everywhere. The USDA rates 40% of rated land here as not or only somewhat limited for a standard drain field and 60% as very limited. Only a site evaluation on your lot can say which you have.

What size septic tank do I need in Franklin County?

Washington's minimum is 1,000 gal for 3 bedrooms and 1,000 gal for 4. Your county can require more.

What is the most common septic problem with soil in Franklin County?

Slow-draining subsoil, a limiting factor on about 58% of the county. Designers usually answer with a larger drain field, shallower trenches, pressure dosing or a mound.

Sources

  • https://sdmdataaccess.sc.egov.usda.gov/
  • https://websoilsurvey.nrcs.usda.gov/app/
  • https://www.nrcs.usda.gov/resources/data-and-reports/soil-survey-interpretations
  • https://www.epa.gov/septic/types-septic-systems
  • https://lawfilesext.leg.wa.gov/Law/WAC/WAC%20246%20%20TITLE/WAC%20246%20-272A%20CHAPTER/WAC%20246%20-272A-0232.htm
  • https://pubs.nmsu.edu/_m/M113/