Septic Tank Calculator

Home / Guides

Septic Tank Cost by Size and Material

What the tank itself costs, by size and by material, before excavation and the drain field.

Count every room that could be used as a bedroom. Most states size the tank by bedrooms, not by who lives there now.
Used only for the pumping estimate.

Minimum tank size

Choose your state and bedrooms, then press Calculate.

Cost by size

Tank sizeUsually servesTank cost
500 gal1 bedroom$500–$900
750 gal2 bedrooms$700–$1,200
1,000 gal3–4 bedrooms$900–$1,500
1,200 gal5–6 bedrooms$1,200–$1,600
1,500 gal6–7 bedrooms$1,500–$2,500

Tank only, from HomeAdvisor. Your state's minimum for your bedroom count decides the size.

Cost by material

MaterialTank cost
Concrete$700–$2,000
Plastic (polyethylene)$500–$2,000
Fiberglass$1,200–$2,000
SteelNo longer installed new

The tank is a modest share of the job. Installed, a complete conventional system runs $3,000–$8,000 and a concrete tank alone $2,300–$6,500 with installation.

Pros and cons of each material

Concrete Septic Tank

Concrete is the most common tank material. Its weight keeps it in the ground where the water table is high, which plastic and fiberglass tanks need anchors or ballast to match. Over decades concrete can crack, and older tanks may be less robust than modern precast ones; the EPA notes a concrete tank may last 50 years or more.

HomeAdvisor puts a concrete tank at $700–$2,000, before installation.

Plastic Septic Tank

Polyethylene tanks are light, cheap to deliver and do not rust or crack the way concrete can. Their light weight is also the weakness: they can be damaged during installation and must be anchored where groundwater is high. Not every state or county approves plastic tanks, so check before you buy.

HomeAdvisor puts a plastic tank at $500–$2,000, before installation.

Fiberglass Septic Tank

Fiberglass tanks are stronger than plastic and do not rust or crack easily, but they cost more. Like plastic, they can be damaged during installation and can shift or float if the water table rises, so they are anchored on wet sites.

HomeAdvisor puts a fiberglass tank at $1,200–$2,000, before installation.

Steel Septic Tank

Steel tanks are found in older homes but are no longer used for new installations, because they rust. A rusted tank can collapse, so a steel tank should be inspected and replaced with concrete, plastic or fiberglass as it deteriorates.

Replacing a tank costs $3,000–$10,000 installed, according to HomeAdvisor.

Common questions

Which septic tank material is best?

Concrete suits most sites and stays put where groundwater is high. Plastic is cheapest to deliver and install but must be anchored on wet sites and is not approved everywhere. Fiberglass resists rust and cracking at a higher price.

What size tank do I need?

Your state's minimum for your bedroom count, rounded up to a standard size. Use the calculator above.

Sources

  • https://www.homeadvisor.com/cost/plumbing/install-a-septic-tank/
  • https://www.angi.com/articles/what-does-it-cost-install-septic-system.htm
  • https://www.thisoldhouse.com/plumbing/septic-tank-installation
  • https://www.houzz.com/cost/50-cost-to-install-a-septic-tank
  • https://www.epa.gov/septic/why-maintain-your-septic-system