Estimated cost
Choose your tank size and press Estimate cost.
What pumping costs
Angi reports an average of $423, with most homeowners paying $289–$557. Tank size drives the price:
| Tank size | Typical cost |
|---|---|
| 750 gal | $250–$550 |
| 1,000 gal | $325–$700 |
| 1,250 gal | $375–$900 |
| 1,500 gal | $450–$1,100 |
If the lid is buried, uncovering it adds about $50–$250 each time. A riser to grade costs $300–$600 once.
When to pump
The EPA says to pump when any of these is true:
- The bottom of the scum layer is within 6 inches of the outlet.
- The top of the sludge layer is within 12 inches of the outlet.
- Sludge and scum fill more than 25% of the liquid depth.
For most households that means every 3 to 5 years. See how often to pump for your household size.
Common questions
Is pumping the same as cleaning?
Pumping removes the liquid, scum and most of the sludge. A full cleaning also rinses the tank walls and baffles and costs more, often closer to $1,000 for a large tank.
Do additives replace pumping?
No. New Mexico State University's extension service notes that additives are not necessary and do not remove the need to pump.
Why do prices vary so much by city?
Labor and disposal fees. Angi found averages of $175 to $275 in Minneapolis and up to $750 in Portland, Oregon, for the same job.
Related pages
Sources
- https://www.angi.com/articles/how-much-does-septic-tank-pumping-cost.htm
- https://www.angi.com/articles/what-does-it-cost-install-septic-system.htm
- https://www.angi.com/articles/septic-inspection-cost.htm
- https://www.epa.gov/septic/how-care-your-septic-system
- https://pubs.nmsu.edu/_m/M113/
- https://www.bls.gov/oes/tables.htm (OEWS May 2025, plumbers, pipefitters and steamfitters, 47-2152)