Minimum tank size
Idaho is selected. Choose your bedrooms and press Calculate.
Drain field suitability in Elmore County Area, Parts of Elmore and Owyhee Counties
Most rated land in Elmore County Area, Parts of Elmore and Owyhee Counties is very limited for a standard drain field: 86% of it. Expect a site evaluation to point many lots toward a larger field, pressure distribution or an engineered system.
- 7% not limited
- 6% somewhat limited
- 84% very limited
- 3% not rated (urban land, water, pits)
Share of the soil survey area's 2,001,581 acres, by the USDA rating “ENG – Septic Tank Absorption Fields”. Ratings assume a standard gravity trench system with no site changes, so “very limited” means a conventional field needs special design, not that septic is impossible.
What limits drain fields here
The most common limiting factors in Elmore County Area, Parts of Elmore and Owyhee Counties, as a share of all its land. One soil can have several, so the figures overlap.
Steep slopes42% of the county
Slopes over about 8% make it hard to keep trenches level and can let effluent seep out downhill.
Trenches are laid along the contour, often with serial distribution or drip dispersal.
Slow-draining subsoil37% of the county
Water moves too slowly through the soil 2 to 6 feet down, so effluent can back up or surface.
Designers usually answer with a larger drain field, shallower trenches, pressure dosing or a mound.
Shallow bedrock33% of the county
Rock lies within about 3 to 6 feet of the surface, so there is little soil to filter effluent before it reaches the rock.
At-grade systems, mounds or drip dispersal add soil depth above the rock.
Hardpan or caliche30% of the county
A cemented layer within about 3 to 6 feet blocks downward drainage.
Trenches may be dug through the pan, or a mound placed above it.
Drains too fast19% of the county
Coarse soil at the bottom of the trench passes effluent through before it is treated, which risks groundwater.
Pretreatment units or a sand liner slow the flow and finish the treatment.
Main soils in Elmore County Area, Parts of Elmore and Owyhee Counties
The soils and land types covering the most ground. Search your address in the USDA Web Soil Survey to see which one is on your lot.
| Soil or land type | Share of county |
|---|---|
| Purdam | 6.9% |
| Colthorp | 3.7% |
| Royal | 3.4% |
| Chilcott | 3.4% |
| Typic Torriorthents | 2.9% |
| Roanhide | 2.8% |
| Truesdale | 2.5% |
| Rainey | 2.4% |
Idaho tank size rules
Homes with 1 or 2 bedrooms need 900 gallons and 3 or 4 bedrooms need 1,000. Add 250 gallons for each bedroom over 4.
| Bedrooms | Minimum tank |
|---|---|
| 1 BR | 900 gal |
| 2 BR | 900 gal |
| 3 BR | 1,000 gal |
| 4 BR | 1,000 gal |
| 5 BR | 1,250 gal |
| 6 BR | 1,500 gal |
Source: IDAPA 58.01.03.007.07.
Common questions
Can I put a conventional septic system in Elmore County Area, Parts of Elmore and Owyhee Counties?
Often, but not everywhere. The USDA rates 14% of rated land here as not or only somewhat limited for a standard drain field and 86% as very limited. Only a site evaluation on your lot can say which you have.
What size septic tank do I need in Elmore County Area, Parts of Elmore and Owyhee Counties?
Idaho's minimum is 1,000 gal for 3 bedrooms and 1,000 gal for 4. Your county can require more.
What is the most common septic problem with soil in Elmore County Area, Parts of Elmore and Owyhee Counties?
Steep slopes, a limiting factor on about 42% of the county. Trenches are laid along the contour, often with serial distribution or drip dispersal.
More in Idaho
Sources
- https://sdmdataaccess.sc.egov.usda.gov/
- https://websoilsurvey.nrcs.usda.gov/app/
- https://www.nrcs.usda.gov/resources/data-and-reports/soil-survey-interpretations
- https://www.epa.gov/septic/types-septic-systems
- https://d1tvxue8o4w0fl.cloudfront.net/regulation/idaho-administrative-code/title-idapa-58-environmental-quality-department-of/rule-580103-individualsubsurface-sewage-disposal-rules-and-rules-for-cleaning-of-septic-tanks/section-580103007-septic-tanks-design-and-construction-standards
- https://pubs.nmsu.edu/_m/M113/