Minimum tank size
Iowa is selected. Choose your bedrooms and press Calculate.
Drain field suitability in Howard County
Most rated land in Howard County is very limited for a standard drain field: 99% of it. Expect a site evaluation to point many lots toward a larger field, pressure distribution or an engineered system.
- 0% not limited
- 1% somewhat limited
- 98% very limited
- 1% not rated (urban land, water, pits)
Share of the soil survey area's 302,698 acres, by the USDA rating “ENG – Septic Tank Absorption Fields”. Ratings assume a standard gravity trench system with no site changes, so “very limited” means a conventional field needs special design, not that septic is impossible.
What limits drain fields here
The most common limiting factors in Howard County, as a share of all its land. One soil can have several, so the figures overlap.
Slow-draining subsoil93% of the county
Water moves too slowly through the soil 2 to 6 feet down, so effluent can back up or surface.
Designers usually answer with a larger drain field, shallower trenches, pressure dosing or a mound.
High water table76% of the county
The water table rises to within 4 to 6 feet of the surface for part of the year, leaving too little dry soil to treat effluent.
Mounds, sand filters or treatment units that need less separation are common answers.
Drains too fast14% of the county
Coarse soil at the bottom of the trench passes effluent through before it is treated, which risks groundwater.
Pretreatment units or a sand liner slow the flow and finish the treatment.
Flood-prone ground9% of the county
The soil is on ground that floods, even if rarely, and a flooded drain field stops working.
Systems are placed above flood level, with watertight tanks and backflow protection.
Shallow bedrock7% of the county
Rock lies within about 3 to 6 feet of the surface, so there is little soil to filter effluent before it reaches the rock.
At-grade systems, mounds or drip dispersal add soil depth above the rock.
Main soils in Howard County
The soils and land types covering the most ground. Search your address in the USDA Web Soil Survey to see which one is on your lot.
| Soil or land type | Share of county |
|---|---|
| Clyde | 13.8% |
| Floyd | 13.1% |
| Bassett | 6.3% |
| Kenyon | 5.7% |
| Schley | 5.4% |
| Ostrander | 3.4% |
| Rockton | 3.2% |
| Cresco | 3.1% |
Iowa tank size rules
Homes with up to 3 bedrooms need 1,250 gallons. Add 250 gallons for each additional bedroom, or use twice the daily flow if that is larger.
| Bedrooms | Minimum tank |
|---|---|
| 1 BR | 1,250 gal |
| 2 BR | 1,250 gal |
| 3 BR | 1,250 gal |
| 4 BR | 1,500 gal |
| 5 BR | 1,750 gal |
| 6 BR | 2,000 gal |
Source: Iowa Admin. Code 567-69.3(2), Table I.
Common questions
Can I put a conventional septic system in Howard County?
Often, but not everywhere. The USDA rates 1% of rated land here as not or only somewhat limited for a standard drain field and 99% as very limited. Only a site evaluation on your lot can say which you have.
What size septic tank do I need in Howard County?
Iowa's minimum is 1,250 gal for 3 bedrooms and 1,500 gal for 4. Your county can require more.
What is the most common septic problem with soil in Howard County?
Slow-draining subsoil, a limiting factor on about 93% of the county. Designers usually answer with a larger drain field, shallower trenches, pressure dosing or a mound.
More in Iowa
Sources
- https://sdmdataaccess.sc.egov.usda.gov/
- https://websoilsurvey.nrcs.usda.gov/app/
- https://www.nrcs.usda.gov/resources/data-and-reports/soil-survey-interpretations
- https://www.epa.gov/septic/types-septic-systems
- https://www.legis.iowa.gov/docs/iac/rule/05-13-2026.567.69.3.rtf
- https://pubs.nmsu.edu/_m/M113/