Septic Tank Calculator

Home / By county / Oregon

Septic Systems in Polk County, Oregon

How much of Polk County the USDA rates as suitable for a septic drain field, what usually limits it, and the tank size Oregon requires.

Count every room that could be used as a bedroom. Most states size the tank by bedrooms, not by who lives there now.
Used only for the pumping estimate.

Minimum tank size

Oregon is selected. Choose your bedrooms and press Calculate.

Drain field suitability in Polk County

Most rated land in Polk County is very limited for a standard drain field: 97% of it. Expect a site evaluation to point many lots toward a larger field, pressure distribution or an engineered system.

  • 0% not limited
  • 3% somewhat limited
  • 96% very limited
  • 1% not rated (urban land, water, pits)

Share of the soil survey area's 419,090 acres, by the USDA rating “ENG – Septic Tank Absorption Fields”. Ratings assume a standard gravity trench system with no site changes, so “very limited” means a conventional field needs special design, not that septic is impossible.

What limits drain fields here

The most common limiting factors in Polk County, as a share of all its land. One soil can have several, so the figures overlap.

  • Slow-draining subsoil77% of the county

    Water moves too slowly through the soil 2 to 6 feet down, so effluent can back up or surface.

    Designers usually answer with a larger drain field, shallower trenches, pressure dosing or a mound.

  • Steep slopes57% of the county

    Slopes over about 8% make it hard to keep trenches level and can let effluent seep out downhill.

    Trenches are laid along the contour, often with serial distribution or drip dispersal.

  • Shallow bedrock47% of the county

    Rock lies within about 3 to 6 feet of the surface, so there is little soil to filter effluent before it reaches the rock.

    At-grade systems, mounds or drip dispersal add soil depth above the rock.

  • High water table31% of the county

    The water table rises to within 4 to 6 feet of the surface for part of the year, leaving too little dry soil to treat effluent.

    Mounds, sand filters or treatment units that need less separation are common answers.

  • Large stones19% of the county

    Stones over 3 inches make up a quarter or more of the top 16 inches, which makes trenches hard to dig and level.

    Contractors may need heavier equipment or imported fill.

Main soils in Polk County

The soils and land types covering the most ground. Search your address in the USDA Web Soil Survey to see which one is on your lot.

Soil or land typeShare of county
Jory7.6%
Valsetz6.4%
Klickitat5.9%
Woodburn5.4%
Bohannon4.4%
Dayton3.0%
Waldo3.0%
Kilchis2.9%

Oregon tank size rules

Homes with up to 4 bedrooms need at least 1,000 gallons, and larger homes at least 1,500. The permitting agent may require a larger tank.

BedroomsMinimum tank
1 BR1,000 gal
2 BR1,000 gal
3 BR1,000 gal
4 BR1,000 gal
5 BR1,500 gal
6 BR1,500 gal

Source: OAR 340-071-0220(3).

All Oregon septic rules

Common questions

Can I put a conventional septic system in Polk County?

Often, but not everywhere. The USDA rates 3% of rated land here as not or only somewhat limited for a standard drain field and 97% as very limited. Only a site evaluation on your lot can say which you have.

What size septic tank do I need in Polk County?

Oregon's minimum is 1,000 gal for 3 bedrooms and 1,000 gal for 4. Your county can require more.

What is the most common septic problem with soil in Polk County?

Slow-draining subsoil, a limiting factor on about 77% of the county. Designers usually answer with a larger drain field, shallower trenches, pressure dosing or a mound.

Sources

  • https://sdmdataaccess.sc.egov.usda.gov/
  • https://websoilsurvey.nrcs.usda.gov/app/
  • https://www.nrcs.usda.gov/resources/data-and-reports/soil-survey-interpretations
  • https://www.epa.gov/septic/types-septic-systems
  • https://regulations.justia.com/states/oregon/chapter-340/division-71/section-340-071-0220/
  • https://pubs.nmsu.edu/_m/M113/