Minimum tank size
Virginia is selected. Choose your bedrooms and press Calculate.
Drain field suitability in Prince George County
Most rated land in Prince George County is very limited for a standard drain field: 90% of it. Expect a site evaluation to point many lots toward a larger field, pressure distribution or an engineered system.
- 0% not limited
- 9% somewhat limited
- 84% very limited
- 7% not rated (urban land, water, pits)
Share of the soil survey area's 161,815 acres, by the USDA rating “ENG – Septic Tank Absorption Fields”. Ratings assume a standard gravity trench system with no site changes, so “very limited” means a conventional field needs special design, not that septic is impossible.
What limits drain fields here
The most common limiting factors in Prince George County, as a share of all its land. One soil can have several, so the figures overlap.
Slow-draining subsoil91% of the county
Water moves too slowly through the soil 2 to 6 feet down, so effluent can back up or surface.
Designers usually answer with a larger drain field, shallower trenches, pressure dosing or a mound.
High water table89% of the county
The water table rises to within 4 to 6 feet of the surface for part of the year, leaving too little dry soil to treat effluent.
Mounds, sand filters or treatment units that need less separation are common answers.
Flood-prone ground12% of the county
The soil is on ground that floods, even if rarely, and a flooded drain field stops working.
Systems are placed above flood level, with watertight tanks and backflow protection.
Steep slopes10% of the county
Slopes over about 8% make it hard to keep trenches level and can let effluent seep out downhill.
Trenches are laid along the contour, often with serial distribution or drip dispersal.
Hardpan or caliche8% of the county
A cemented layer within about 3 to 6 feet blocks downward drainage.
Trenches may be dug through the pan, or a mound placed above it.
Main soils in Prince George County
The soils and land types covering the most ground. Search your address in the USDA Web Soil Survey to see which one is on your lot.
| Soil or land type | Share of county |
|---|---|
| Emporia | 18.0% |
| Slagle | 15.1% |
| Ackwater | 12.3% |
| Kinston | 8.1% |
| Montross | 7.4% |
| Peawick | 5.8% |
| Water | 4.6% |
| Aycock | 4.2% |
Virginia tank size rules
Homes with up to 2 bedrooms need 750 gallons, 3 bedrooms 900, 4 bedrooms 1,200 and 5 bedrooms 1,500. Larger homes are sized for 48 hours of design flow.
| Bedrooms | Minimum tank |
|---|---|
| 1 BR | 750 gal |
| 2 BR | 750 gal |
| 3 BR | 900 gal |
| 4 BR | 1,200 gal |
| 5 BR | 1,500 gal |
| 6 BR | Set locally |
Source: 12VAC5-610-815(A), Table 5.2.
Common questions
Can I put a conventional septic system in Prince George County?
Often, but not everywhere. The USDA rates 10% of rated land here as not or only somewhat limited for a standard drain field and 90% as very limited. Only a site evaluation on your lot can say which you have.
What size septic tank do I need in Prince George County?
Virginia's minimum is 900 gal for 3 bedrooms and 1,200 gal for 4. Your county can require more.
What is the most common septic problem with soil in Prince George County?
Slow-draining subsoil, a limiting factor on about 91% of the county. Designers usually answer with a larger drain field, shallower trenches, pressure dosing or a mound.
More in Virginia
Sources
- https://sdmdataaccess.sc.egov.usda.gov/
- https://websoilsurvey.nrcs.usda.gov/app/
- https://www.nrcs.usda.gov/resources/data-and-reports/soil-survey-interpretations
- https://www.epa.gov/septic/types-septic-systems
- https://law.lis.virginia.gov/admincode/title12/agency5/chapter610/section815/
- https://pubs.nmsu.edu/_m/M113/