Septic Tank Calculator

Home / By county / Washington

Septic Systems in King County Area, Washington

How much of King County Area the USDA rates as suitable for a septic drain field, what usually limits it, and the tank size Washington requires.

Count every room that could be used as a bedroom. Most states size the tank by bedrooms, not by who lives there now.
Used only for the pumping estimate.

Minimum tank size

Washington is selected. Choose your bedrooms and press Calculate.

Drain field suitability in King County Area

Most rated land in King County Area is very limited for a standard drain field: 100% of it. Expect a site evaluation to point many lots toward a larger field, pressure distribution or an engineered system.

  • 0% not limited
  • 0% somewhat limited
  • 91% very limited
  • 9% not rated (urban land, water, pits)

Share of the soil survey area's 406,857 acres, by the USDA rating “ENG – Septic Tank Absorption Fields”. Ratings assume a standard gravity trench system with no site changes, so “very limited” means a conventional field needs special design, not that septic is impossible.

What limits drain fields here

The most common limiting factors in King County Area, as a share of all its land. One soil can have several, so the figures overlap.

  • High water table70% of the county

    The water table rises to within 4 to 6 feet of the surface for part of the year, leaving too little dry soil to treat effluent.

    Mounds, sand filters or treatment units that need less separation are common answers.

  • Steep slopes58% of the county

    Slopes over about 8% make it hard to keep trenches level and can let effluent seep out downhill.

    Trenches are laid along the contour, often with serial distribution or drip dispersal.

  • Drains too fast25% of the county

    Coarse soil at the bottom of the trench passes effluent through before it is treated, which risks groundwater.

    Pretreatment units or a sand liner slow the flow and finish the treatment.

  • Poor filtering layer20% of the county

    Very permeable material 2 to 5 feet down filters effluent poorly.

    Pretreatment or added fill gives the effluent more treatment before it reaches that layer.

  • Slow-draining subsoil19% of the county

    Water moves too slowly through the soil 2 to 6 feet down, so effluent can back up or surface.

    Designers usually answer with a larger drain field, shallower trenches, pressure dosing or a mound.

Main soils in King County Area

The soils and land types covering the most ground. Search your address in the USDA Web Soil Survey to see which one is on your lot.

Soil or land typeShare of county
Alderwood41.0%
Everett10.1%
Arents4.6%
Kitsap4.5%
Urban land3.5%
Buckley2.8%
Water2.6%
Beausite2.6%

Washington tank size rules

Homes with up to 4 bedrooms need 1,000 gallons. Add 250 gallons for each additional bedroom.

BedroomsMinimum tank
1 BR1,000 gal
2 BR1,000 gal
3 BR1,000 gal
4 BR1,000 gal
5 BR1,250 gal
6 BR1,500 gal

Source: WAC 246-272A-0232, Table VII.

All Washington septic rules

Common questions

Can I put a conventional septic system in King County Area?

Often, but not everywhere. The USDA rates 0% of rated land here as not or only somewhat limited for a standard drain field and 100% as very limited. Only a site evaluation on your lot can say which you have.

What size septic tank do I need in King County Area?

Washington's minimum is 1,000 gal for 3 bedrooms and 1,000 gal for 4. Your county can require more.

What is the most common septic problem with soil in King County Area?

High water table, a limiting factor on about 70% of the county. Mounds, sand filters or treatment units that need less separation are common answers.

Sources

  • https://sdmdataaccess.sc.egov.usda.gov/
  • https://websoilsurvey.nrcs.usda.gov/app/
  • https://www.nrcs.usda.gov/resources/data-and-reports/soil-survey-interpretations
  • https://www.epa.gov/septic/types-septic-systems
  • https://lawfilesext.leg.wa.gov/Law/WAC/WAC%20246%20%20TITLE/WAC%20246%20-272A%20CHAPTER/WAC%20246%20-272A-0232.htm
  • https://pubs.nmsu.edu/_m/M113/