Home / By county / Washington
Septic Systems in Mason County, Washington
How much of Mason County the USDA rates as suitable for a septic drain field, what usually limits it, and the tank size Washington requires.
Minimum tank size
Washington is selected. Choose your bedrooms and press Calculate.
Drain field suitability in Mason County
Most rated land in Mason County is very limited for a standard drain field: 97% of it. Expect a site evaluation to point many lots toward a larger field, pressure distribution or an engineered system.
- 0% not limited
- 3% somewhat limited
- 95% very limited
- 2% not rated (urban land, water, pits)
Share of the soil survey area's 450,456 acres, by the USDA rating “ENG – Septic Tank Absorption Fields”. Ratings assume a standard gravity trench system with no site changes, so “very limited” means a conventional field needs special design, not that septic is impossible.
What limits drain fields here
The most common limiting factors in Mason County, as a share of all its land. One soil can have several, so the figures overlap.
Steep slopes73% of the county
Slopes over about 8% make it hard to keep trenches level and can let effluent seep out downhill.
Trenches are laid along the contour, often with serial distribution or drip dispersal.
High water table54% of the county
The water table rises to within 4 to 6 feet of the surface for part of the year, leaving too little dry soil to treat effluent.
Mounds, sand filters or treatment units that need less separation are common answers.
Drains too fast30% of the county
Coarse soil at the bottom of the trench passes effluent through before it is treated, which risks groundwater.
Pretreatment units or a sand liner slow the flow and finish the treatment.
Slow-draining subsoil26% of the county
Water moves too slowly through the soil 2 to 6 feet down, so effluent can back up or surface.
Designers usually answer with a larger drain field, shallower trenches, pressure dosing or a mound.
Poor filtering layer24% of the county
Very permeable material 2 to 5 feet down filters effluent poorly.
Pretreatment or added fill gives the effluent more treatment before it reaches that layer.
Main soils in Mason County
The soils and land types covering the most ground. Search your address in the USDA Web Soil Survey to see which one is on your lot.
| Soil or land type | Share of county |
|---|---|
| Alderwood | 18.5% |
| Grove | 14.1% |
| Shelton | 12.0% |
| Hoodsport | 8.6% |
| Rough mountainous land | 6.2% |
| Tebo | 4.9% |
| Everett | 4.3% |
| Cloquallum | 3.1% |
Washington tank size rules
Homes with up to 4 bedrooms need 1,000 gallons. Add 250 gallons for each additional bedroom.
| Bedrooms | Minimum tank |
|---|---|
| 1 BR | 1,000 gal |
| 2 BR | 1,000 gal |
| 3 BR | 1,000 gal |
| 4 BR | 1,000 gal |
| 5 BR | 1,250 gal |
| 6 BR | 1,500 gal |
Source: WAC 246-272A-0232, Table VII.
Common questions
Can I put a conventional septic system in Mason County?
Often, but not everywhere. The USDA rates 3% of rated land here as not or only somewhat limited for a standard drain field and 97% as very limited. Only a site evaluation on your lot can say which you have.
What size septic tank do I need in Mason County?
Washington's minimum is 1,000 gal for 3 bedrooms and 1,000 gal for 4. Your county can require more.
What is the most common septic problem with soil in Mason County?
Steep slopes, a limiting factor on about 73% of the county. Trenches are laid along the contour, often with serial distribution or drip dispersal.
More in Washington
Sources
- https://sdmdataaccess.sc.egov.usda.gov/
- https://websoilsurvey.nrcs.usda.gov/app/
- https://www.nrcs.usda.gov/resources/data-and-reports/soil-survey-interpretations
- https://www.epa.gov/septic/types-septic-systems
- https://lawfilesext.leg.wa.gov/Law/WAC/WAC%20246%20%20TITLE/WAC%20246%20-272A%20CHAPTER/WAC%20246%20-272A-0232.htm
- https://pubs.nmsu.edu/_m/M113/