Septic Tank Calculator

Home / Guides

Buying a House With a Septic System

A failed septic system can cost more than a new roof. Check these before you close.

Count every room that could be used as a bedroom. Most states size the tank by bedrooms, not by who lives there now.
Used only for the pumping estimate.

Minimum tank size

Choose your state and bedrooms, then press Calculate.

Get the right inspection

Ask for an in-depth inspection, not a visual check. Angi puts in-depth assessments at $400–$700, against $200–$250 for a quick look. The EPA describes a full inspection as reviewing the permit and records, opening every tank and the distribution box, and measuring sludge and scum.

Checklist

  • Records. Ask for the permit, the system design and pumping receipts. No pumping in 5 years is a warning sign.
  • Tank size against bedrooms. Check the permit's bedroom count against the house. A bedroom added later may make the system too small under state rules; use the calculator above.
  • Age. Drain fields often need replacing after 25 to 30 years.
  • Soil. Check the county's soil rating to see what a replacement would likely need.
  • Signs of failure. Spongy grass, odors or slow drains. See the full list.

Common questions

Who pays for a failed septic inspection?

It is part of the negotiation. A buyer can ask the seller to repair or replace the system, or to lower the price by the amount of contractor quotes.

Should the tank be pumped before the inspection?

Ideally during it, so the inspector can see the tank walls and baffles and how much sludge had built up.

Sources

  • https://www.angi.com/articles/septic-inspection-cost.htm
  • https://www.epa.gov/septic/how-care-your-septic-system
  • https://www.epa.gov/septic/why-maintain-your-septic-system
  • https://www.epa.gov/septic/what-do-if-your-septic-system-fails