Tank capacity
Enter your tank's measurements and press Calculate gallons.
How to measure
- Length and width: the inside dimensions. If you can only measure outside, subtract the wall thickness on each side, often 2 to 4 inches for precast concrete.
- Liquid depth: from the tank floor to the bottom of the outlet pipe, which is the highest the liquid can rise. A pumping company can give you this when the tank is empty.
- Round tanks: measure the inside diameter and length. Leave the depth blank if the liquid fills the tank.
Never lean into or enter a septic tank. Tanks can hold dangerous gases, the EPA warns; measure from outside with a pole or ask your pumper.
The formulas
Rectangular: length × width × liquid depth in feet gives cubic feet; one cubic foot holds 7.48 gallons. Round tanks on their side use the area of the liquid's circular segment times the length.
Length needed for each standard size
For a tank 4.5 feet wide with 4 feet of liquid, close to the typical residential tank Angi describes (about 4.5 ft wide, 8 ft long and 6 ft tall overall):
| Capacity | Inside length |
|---|---|
| 750 gal | 5.6 ft |
| 1,000 gal | 7.4 ft |
| 1,250 gal | 9.3 ft |
| 1,500 gal | 11.1 ft |
| 1,750 gal | 13.0 ft |
| 2,000 gal | 14.9 ft |
Calculated, not a manufacturer's specification. Real tanks vary in width and depth.
Common questions
How do I find my septic tank size without measuring?
Check the permit or as-built drawing at your county health department, or the last pumping receipt, which usually records the gallons pumped.
Is my old tank legal if it is below today's minimum?
Usually, until it fails or the house adds bedrooms. Many health departments require the current minimum when the system is repaired or the house is expanded.
Related pages
Sources
- https://www.angi.com/articles/how-big-is-septic-tank.htm
- https://www.epa.gov/ground-water-and-drinking-water/septic-systems-what-do-after-flood