Estimated cost
Choose your state and press Estimate cost.
How it works
Effluent is dosed under pressure into drip lines buried in the top 6 to 12 inches of soil.
When it is used
Because the lines are shallow, no large mound is needed, which helps on shallow soil and slopes. It requires a large dose tank, electric power and more maintenance than a gravity system.
Cost
HomeAdvisor puts a drip distribution system at $8,000–$18,000 installed. Every type compared:
| System type | Installed cost | Where it is used |
|---|---|---|
| Conventional (gravity trench) | $3,000–$8,000 | Soil that drains well, enough room |
| Chamber | $5,000–$12,000 | High groundwater, scarce gravel, part-time use |
| Constructed wetland | $5,000–$12,000 | Sites that need extra treatment |
| Sand filter | $7,000–$18,000 | High water table, near lakes or streams |
| Drip distribution | $8,000–$18,000 | Shallow soil, no room for a mound |
| Evapotranspiration | $10,000–$15,000 | Dry, hot climates only |
| Aerobic treatment unit | $10,000–$20,000 | Small lots, poor soil, sensitive water |
| Mound | $10,000–$20,000 | Shallow soil, high water table, shallow rock |
Where soils point to a drip distribution system
Survey areas where the most land is limited by shallow bedrock, steep slopes, from USDA soil data:
Related pages
Sources
- https://www.epa.gov/septic/types-septic-systems
- https://www.homeadvisor.com/cost/plumbing/install-a-septic-tank/
- https://sdmdataaccess.sc.egov.usda.gov/