Septic Tank Calculator

Home / Guides

Conventional (gravity trench) Septic System

How a conventional (gravity trench) system works, the sites it suits, and what it costs to install.

Scales the labor share by the state's plumber wages.
A soil test decides which type your lot can use.

Estimated cost

Choose your state and press Estimate cost.

How it works

A septic tank followed by a drain field of gravel or stone trenches. Effluent flows by gravity from the tank into perforated pipes and soaks into the soil, which finishes the treatment.

When it is used

It is the long-established design for single-family homes and small businesses. It needs soil that drains at a moderate rate and a fairly large area for the trenches, so some sites cannot use it.

Cost

HomeAdvisor puts a conventional (gravity trench) system at $3,000–$8,000 installed. Every type compared:

System typeInstalled costWhere it is used
Conventional (gravity trench)$3,000–$8,000Soil that drains well, enough room
Chamber$5,000–$12,000High groundwater, scarce gravel, part-time use
Constructed wetland$5,000–$12,000Sites that need extra treatment
Sand filter$7,000–$18,000High water table, near lakes or streams
Drip distribution$8,000–$18,000Shallow soil, no room for a mound
Evapotranspiration$10,000–$15,000Dry, hot climates only
Aerobic treatment unit$10,000–$20,000Small lots, poor soil, sensitive water
Mound$10,000–$20,000Shallow soil, high water table, shallow rock

Counties where conventional systems fit most land

Survey areas with the largest share of rated land that is not or only somewhat limited for a standard drain field:

Sources

  • https://www.epa.gov/septic/types-septic-systems
  • https://www.homeadvisor.com/cost/plumbing/install-a-septic-tank/
  • https://sdmdataaccess.sc.egov.usda.gov/