Septic Tank Calculator

Home / Guides

Sand filter Septic System

How a sand filter system works, the sites it suits, and what it costs to install.

Scales the labor share by the state's plumber wages.
A soil test decides which type your lot can use.

Estimated cost

Choose your state and press Estimate cost.

How it works

A pump sends tank effluent through a sand filter, above or below ground, and recirculates it before it reaches the drain field.

When it is used

The EPA notes it gives a high level of nutrient treatment and suits high water tables and sites near lakes or streams. It costs more than a conventional system and needs a pump and power.

Cost

HomeAdvisor puts a sand filter system at $7,000–$18,000 installed. Every type compared:

System typeInstalled costWhere it is used
Conventional (gravity trench)$3,000–$8,000Soil that drains well, enough room
Chamber$5,000–$12,000High groundwater, scarce gravel, part-time use
Constructed wetland$5,000–$12,000Sites that need extra treatment
Sand filter$7,000–$18,000High water table, near lakes or streams
Drip distribution$8,000–$18,000Shallow soil, no room for a mound
Evapotranspiration$10,000–$15,000Dry, hot climates only
Aerobic treatment unit$10,000–$20,000Small lots, poor soil, sensitive water
Mound$10,000–$20,000Shallow soil, high water table, shallow rock

Where soils point to a sand filter system

Survey areas where the most land is limited by high water table, drains too fast, poor filtering layer, from USDA soil data:

Sources

  • https://www.epa.gov/septic/types-septic-systems
  • https://www.homeadvisor.com/cost/plumbing/install-a-septic-tank/
  • https://sdmdataaccess.sc.egov.usda.gov/