Septic Tank Calculator

Home / Guides

Mound Septic System

How a mound system works, the sites it suits, and what it costs to install.

Scales the labor share by the state's plumber wages.
A soil test decides which type your lot can use.

Estimated cost

Choose your state and press Estimate cost.

How it works

A drain field built inside a mound of sand above the natural ground. A pump doses effluent into the mound, where the sand treats it before it reaches the native soil.

When it is used

The EPA lists it for shallow soil, high groundwater and shallow bedrock. It needs considerable space and periodic maintenance, and the imported sand is a large part of the cost.

Cost

HomeAdvisor puts a mound system at $10,000–$20,000 installed. Every type compared:

System typeInstalled costWhere it is used
Conventional (gravity trench)$3,000–$8,000Soil that drains well, enough room
Chamber$5,000–$12,000High groundwater, scarce gravel, part-time use
Constructed wetland$5,000–$12,000Sites that need extra treatment
Sand filter$7,000–$18,000High water table, near lakes or streams
Drip distribution$8,000–$18,000Shallow soil, no room for a mound
Evapotranspiration$10,000–$15,000Dry, hot climates only
Aerobic treatment unit$10,000–$20,000Small lots, poor soil, sensitive water
Mound$10,000–$20,000Shallow soil, high water table, shallow rock

Where soils point to a mound system

Survey areas where the most land is limited by high water table, shallow bedrock, slow-draining subsoil, from USDA soil data:

Sources

  • https://www.epa.gov/septic/types-septic-systems
  • https://www.homeadvisor.com/cost/plumbing/install-a-septic-tank/
  • https://sdmdataaccess.sc.egov.usda.gov/