Estimated cost
Choose your state and press Estimate cost.
Constructed wetland
An engineered cell lined against leaks and filled with gravel, sand and wetland plants. Microbes and plants treat the effluent, which then goes to a drain field.
It can run by gravity or pressure. Its plants must survive constantly saturated conditions, so the design depends heavily on climate.
HomeAdvisor puts it at $5,000–$12,000 installed.
Evapotranspiration
A lined drain field where effluent rises to the surface and evaporates or is taken up by plants, so it never reaches the soil below.
It works only in dry, hot, sunny climates, and best on shallow soil. Heavy rain or snow can make it fail.
HomeAdvisor puts it at $10,000–$15,000 installed.
Cluster and community systems
A cluster system collects wastewater from two or more buildings and treats it at one nearby site under common ownership. The EPA notes they are common in rural subdivisions, where they can replace a septic system on every lot.
Outdated systems
Cesspools and straight pipes, which discharge untreated sewage, are outdated or banned. A home that still has one usually must replace it when the house is sold or the system fails.
Every type compared
| System type | Installed cost | Where it is used |
|---|---|---|
| Conventional (gravity trench) | $3,000–$8,000 | Soil that drains well, enough room |
| Chamber | $5,000–$12,000 | High groundwater, scarce gravel, part-time use |
| Constructed wetland | $5,000–$12,000 | Sites that need extra treatment |
| Sand filter | $7,000–$18,000 | High water table, near lakes or streams |
| Drip distribution | $8,000–$18,000 | Shallow soil, no room for a mound |
| Evapotranspiration | $10,000–$15,000 | Dry, hot climates only |
| Aerobic treatment unit | $10,000–$20,000 | Small lots, poor soil, sensitive water |
| Mound | $10,000–$20,000 | Shallow soil, high water table, shallow rock |
Related pages
Sources
- https://www.epa.gov/septic/types-septic-systems
- https://www.homeadvisor.com/cost/plumbing/install-a-septic-tank/