Septic Tank Calculator

Home / Cost

Septic System Cost in Maryland

Installation, pumping and inspection costs for Maryland, adjusted for local labor, with Maryland's tank size rule and what its soils mean for the system you will need.

Scales the labor share by the state's plumber wages.
A soil test decides which type your lot can use.

Estimated cost

Maryland is selected. Choose the system type and press Estimate cost.

Installation cost in Maryland

Maryland plumbers earn an average of $35.34 an hour, against $34.70 nationally (BLS, May 2025). Applied to the labor share of the job, that puts Maryland septic work 1% above the national average: a cost factor of 1.01.

System typeInstalled costWhere it is used
Conventional (gravity trench)$3,050–$8,100Soil that drains well, enough room
Chamber$5,050–$12,150High groundwater, scarce gravel, part-time use
Constructed wetland$5,050–$12,150Sites that need extra treatment
Sand filter$7,100–$18,200High water table, near lakes or streams
Drip distribution$8,100–$18,200Shallow soil, no room for a mound
Evapotranspiration$10,100–$15,150Dry, hot climates only
Aerobic treatment unit$10,100–$20,200Small lots, poor soil, sensitive water
Mound$10,100–$20,200Shallow soil, high water table, shallow rock

HomeAdvisor national ranges × 1.01. Perc test ($750–$1,900) and permits ($450–$2,300) are extra.

Tank size and tank cost

Maryland requires at least 1,000 gal for a 3-bedroom home and 1,250 gal for 4 bedrooms. Tanks themselves are priced nationally: $900–$1,500 for 1,000 gallons and $1,500–$2,500 for 1,500, before delivery and setting.

Maryland tank size rules

Pumping and inspection in Maryland

TankPumping cost
750 gal$250–$550
1,000 gal$350–$700
1,250 gal$400–$900
1,500 gal$450–$1,100

A septic inspection runs about $200–$900. The EPA recommends an inspection every 1 to 3 years and pumping every 3 to 5 years.

How Maryland soil affects the price

Across 23 USDA soil survey areas, 91% of rated land in Maryland is very limited for a standard trench drain field, most often because of slow-draining subsoil. Lots on that ground usually need a larger field or an alternative system, which moves the budget from the conventional range toward $10,100–$20,200.

See the rating for your county

Common questions

How much does a septic system cost in Maryland?

About $3,050–$8,100 for a conventional system and $10,100–$20,200 for a mound or aerobic unit, plus testing and permits. These are national figures adjusted for Maryland labor, not quotes.

How much does septic pumping cost in Maryland?

Roughly $300–$550 for a typical tank, more for 1,500 gallons or a buried lid.

Sources

  • https://www.homeadvisor.com/cost/plumbing/install-a-septic-tank/
  • https://www.angi.com/articles/what-does-it-cost-install-septic-system.htm
  • https://www.angi.com/articles/how-much-does-septic-tank-pumping-cost.htm
  • https://www.angi.com/articles/septic-inspection-cost.htm
  • https://www.bls.gov/oes/tables.htm (OEWS May 2025, plumbers, pipefitters and steamfitters, 47-2152)
  • https://www.epa.gov/septic/why-maintain-your-septic-system
  • https://sdmdataaccess.sc.egov.usda.gov/
  • https://dsd.maryland.gov/regulations/Pages/26.04.02.05.aspx