Septic Tank Calculator

Home / Cost

Septic System Cost in Massachusetts

Installation, pumping and inspection costs for Massachusetts, adjusted for local labor, with Massachusetts's tank size rule and what its soils mean for the system you will need.

Scales the labor share by the state's plumber wages.
A soil test decides which type your lot can use.

Estimated cost

Massachusetts is selected. Choose the system type and press Estimate cost.

Installation cost in Massachusetts

Massachusetts plumbers earn an average of $43.46 an hour, against $34.70 nationally (BLS, May 2025). Applied to the labor share of the job, that puts Massachusetts septic work 15% above the national average: a cost factor of 1.15.

System typeInstalled costWhere it is used
Conventional (gravity trench)$3,450–$9,200Soil that drains well, enough room
Chamber$5,750–$13,800High groundwater, scarce gravel, part-time use
Constructed wetland$5,750–$13,800Sites that need extra treatment
Sand filter$8,050–$20,700High water table, near lakes or streams
Drip distribution$9,200–$20,700Shallow soil, no room for a mound
Evapotranspiration$11,500–$17,250Dry, hot climates only
Aerobic treatment unit$11,500–$23,000Small lots, poor soil, sensitive water
Mound$11,500–$23,000Shallow soil, high water table, shallow rock

HomeAdvisor national ranges × 1.15. Perc test ($750–$1,900) and permits ($450–$2,300) are extra.

Tank size and tank cost

Massachusetts requires at least 1,500 gal for a 3-bedroom home and 1,500 gal for 4 bedrooms. Tanks themselves are priced nationally: $900–$1,500 for 1,000 gallons and $1,500–$2,500 for 1,500, before delivery and setting.

Massachusetts tank size rules

Pumping and inspection in Massachusetts

TankPumping cost
750 gal$300–$650
1,000 gal$350–$800
1,250 gal$450–$1,050
1,500 gal$500–$1,250

A septic inspection runs about $250–$1,050. The EPA recommends an inspection every 1 to 3 years and pumping every 3 to 5 years.

How Massachusetts soil affects the price

Across 19 USDA soil survey areas, 96% of rated land in Massachusetts is very limited for a standard trench drain field, most often because of high water table. Lots on that ground usually need a larger field or an alternative system, which moves the budget from the conventional range toward $11,500–$23,000.

See the rating for your county

Common questions

How much does a septic system cost in Massachusetts?

About $3,450–$9,200 for a conventional system and $11,500–$23,000 for a mound or aerobic unit, plus testing and permits. These are national figures adjusted for Massachusetts labor, not quotes.

How much does septic pumping cost in Massachusetts?

Roughly $350–$650 for a typical tank, more for 1,500 gallons or a buried lid.

Sources

  • https://www.homeadvisor.com/cost/plumbing/install-a-septic-tank/
  • https://www.angi.com/articles/what-does-it-cost-install-septic-system.htm
  • https://www.angi.com/articles/how-much-does-septic-tank-pumping-cost.htm
  • https://www.angi.com/articles/septic-inspection-cost.htm
  • https://www.bls.gov/oes/tables.htm (OEWS May 2025, plumbers, pipefitters and steamfitters, 47-2152)
  • https://www.epa.gov/septic/why-maintain-your-septic-system
  • https://sdmdataaccess.sc.egov.usda.gov/
  • https://www.mass.gov/files/documents/2016/09/tg/310cmr15clean.pdf