Septic Tank Calculator

Home / Cost

Septic System Cost in Minnesota

Installation, pumping and inspection costs for Minnesota, adjusted for local labor, with Minnesota's tank size rule and what its soils mean for the system you will need.

Scales the labor share by the state's plumber wages.
A soil test decides which type your lot can use.

Estimated cost

Minnesota is selected. Choose the system type and press Estimate cost.

Installation cost in Minnesota

Minnesota plumbers earn an average of $41.68 an hour, against $34.70 nationally (BLS, May 2025). Applied to the labor share of the job, that puts Minnesota septic work 12% above the national average: a cost factor of 1.12.

System typeInstalled costWhere it is used
Conventional (gravity trench)$3,350–$8,950Soil that drains well, enough room
Chamber$5,600–$13,450High groundwater, scarce gravel, part-time use
Constructed wetland$5,600–$13,450Sites that need extra treatment
Sand filter$7,850–$20,200High water table, near lakes or streams
Drip distribution$8,950–$20,200Shallow soil, no room for a mound
Evapotranspiration$11,200–$16,800Dry, hot climates only
Aerobic treatment unit$11,200–$22,400Small lots, poor soil, sensitive water
Mound$11,200–$22,400Shallow soil, high water table, shallow rock

HomeAdvisor national ranges × 1.12. Perc test ($750–$1,900) and permits ($450–$2,300) are extra.

Tank size and tank cost

Minnesota requires at least 1,000 gal for a 3-bedroom home and 1,500 gal for 4 bedrooms. Tanks themselves are priced nationally: $900–$1,500 for 1,000 gallons and $1,500–$2,500 for 1,500, before delivery and setting.

Minnesota tank size rules

Pumping and inspection in Minnesota

TankPumping cost
750 gal$300–$600
1,000 gal$350–$800
1,250 gal$400–$1,000
1,500 gal$500–$1,250

A septic inspection runs about $200–$1,000. The EPA recommends an inspection every 1 to 3 years and pumping every 3 to 5 years.

How Minnesota soil affects the price

Across 90 USDA soil survey areas, 95% of rated land in Minnesota is very limited for a standard trench drain field, most often because of high water table. Lots on that ground usually need a larger field or an alternative system, which moves the budget from the conventional range toward $11,200–$22,400.

See the rating for your county

Common questions

How much does a septic system cost in Minnesota?

About $3,350–$8,950 for a conventional system and $11,200–$22,400 for a mound or aerobic unit, plus testing and permits. These are national figures adjusted for Minnesota labor, not quotes.

How much does septic pumping cost in Minnesota?

Roughly $300–$600 for a typical tank, more for 1,500 gallons or a buried lid.

Sources

  • https://www.homeadvisor.com/cost/plumbing/install-a-septic-tank/
  • https://www.angi.com/articles/what-does-it-cost-install-septic-system.htm
  • https://www.angi.com/articles/how-much-does-septic-tank-pumping-cost.htm
  • https://www.angi.com/articles/septic-inspection-cost.htm
  • https://www.bls.gov/oes/tables.htm (OEWS May 2025, plumbers, pipefitters and steamfitters, 47-2152)
  • https://www.epa.gov/septic/why-maintain-your-septic-system
  • https://sdmdataaccess.sc.egov.usda.gov/
  • https://regulations.justia.com/states/minnesota/agency-167/chapter-7080/part-7080-1930