Septic Tank Calculator

Home / Cost

Septic System Cost in Montana

Installation, pumping and inspection costs for Montana, adjusted for local labor, with Montana's tank size rule and what its soils mean for the system you will need.

Scales the labor share by the state's plumber wages.
A soil test decides which type your lot can use.

Estimated cost

Montana is selected. Choose the system type and press Estimate cost.

Installation cost in Montana

Montana plumbers earn an average of $37.59 an hour, against $34.70 nationally (BLS, May 2025). Applied to the labor share of the job, that puts Montana septic work 5% above the national average: a cost factor of 1.05.

System typeInstalled costWhere it is used
Conventional (gravity trench)$3,150–$8,400Soil that drains well, enough room
Chamber$5,250–$12,600High groundwater, scarce gravel, part-time use
Constructed wetland$5,250–$12,600Sites that need extra treatment
Sand filter$7,350–$18,900High water table, near lakes or streams
Drip distribution$8,400–$18,900Shallow soil, no room for a mound
Evapotranspiration$10,500–$15,750Dry, hot climates only
Aerobic treatment unit$10,500–$21,000Small lots, poor soil, sensitive water
Mound$10,500–$21,000Shallow soil, high water table, shallow rock

HomeAdvisor national ranges × 1.05. Perc test ($750–$1,900) and permits ($450–$2,300) are extra.

Tank size and tank cost

Montana requires at least 1,000 gal for a 3-bedroom home and 1,500 gal for 4 bedrooms. Tanks themselves are priced nationally: $900–$1,500 for 1,000 gallons and $1,500–$2,500 for 1,500, before delivery and setting.

Montana tank size rules

Pumping and inspection in Montana

TankPumping cost
750 gal$250–$600
1,000 gal$350–$750
1,250 gal$400–$950
1,500 gal$450–$1,150

A septic inspection runs about $200–$950. The EPA recommends an inspection every 1 to 3 years and pumping every 3 to 5 years.

How Montana soil affects the price

Across 51 USDA soil survey areas, 84% of rated land in Montana is very limited for a standard trench drain field, most often because of slow-draining subsoil. Lots on that ground usually need a larger field or an alternative system, which moves the budget from the conventional range toward $10,500–$21,000.

See the rating for your county

Common questions

How much does a septic system cost in Montana?

About $3,150–$8,400 for a conventional system and $10,500–$21,000 for a mound or aerobic unit, plus testing and permits. These are national figures adjusted for Montana labor, not quotes.

How much does septic pumping cost in Montana?

Roughly $300–$600 for a typical tank, more for 1,500 gallons or a buried lid.

Sources

  • https://www.homeadvisor.com/cost/plumbing/install-a-septic-tank/
  • https://www.angi.com/articles/what-does-it-cost-install-septic-system.htm
  • https://www.angi.com/articles/how-much-does-septic-tank-pumping-cost.htm
  • https://www.angi.com/articles/septic-inspection-cost.htm
  • https://www.bls.gov/oes/tables.htm (OEWS May 2025, plumbers, pipefitters and steamfitters, 47-2152)
  • https://www.epa.gov/septic/why-maintain-your-septic-system
  • https://sdmdataaccess.sc.egov.usda.gov/
  • https://deq.mt.gov/files/Water/WQInfo/Documents/Subdivisions/DEQ-4-2023.pdf