Septic Tank Calculator

Home / Cost

Septic System Cost in New Hampshire

Installation, pumping and inspection costs for New Hampshire, adjusted for local labor, with New Hampshire's tank size rule and what its soils mean for the system you will need.

Scales the labor share by the state's plumber wages.
A soil test decides which type your lot can use.

Estimated cost

New Hampshire is selected. Choose the system type and press Estimate cost.

Installation cost in New Hampshire

New Hampshire plumbers earn an average of $31.84 an hour, against $34.70 nationally (BLS, May 2025). Applied to the labor share of the job, that puts New Hampshire septic work 5% below the national average: a cost factor of 0.95.

System typeInstalled costWhere it is used
Conventional (gravity trench)$2,850–$7,600Soil that drains well, enough room
Chamber$4,750–$11,400High groundwater, scarce gravel, part-time use
Constructed wetland$4,750–$11,400Sites that need extra treatment
Sand filter$6,650–$17,100High water table, near lakes or streams
Drip distribution$7,600–$17,100Shallow soil, no room for a mound
Evapotranspiration$9,500–$14,250Dry, hot climates only
Aerobic treatment unit$9,500–$19,000Small lots, poor soil, sensitive water
Mound$9,500–$19,000Shallow soil, high water table, shallow rock

HomeAdvisor national ranges × 0.95. Perc test ($750–$1,900) and permits ($450–$2,300) are extra.

Tank size and tank cost

New Hampshire requires at least 1,250 gal for a 3-bedroom home and 1,250 gal for 4 bedrooms. Tanks themselves are priced nationally: $900–$1,500 for 1,000 gallons and $1,500–$2,500 for 1,500, before delivery and setting.

New Hampshire tank size rules

Pumping and inspection in New Hampshire

TankPumping cost
750 gal$250–$500
1,000 gal$300–$650
1,250 gal$350–$850
1,500 gal$450–$1,050

A septic inspection runs about $200–$850. The EPA recommends an inspection every 1 to 3 years and pumping every 3 to 5 years.

How New Hampshire soil affects the price

Across 10 USDA soil survey areas, 94% of rated land in New Hampshire is very limited for a standard trench drain field, most often because of steep slopes. Lots on that ground usually need a larger field or an alternative system, which moves the budget from the conventional range toward $9,500–$19,000.

See the rating for your county

Common questions

How much does a septic system cost in New Hampshire?

About $2,850–$7,600 for a conventional system and $9,500–$19,000 for a mound or aerobic unit, plus testing and permits. These are national figures adjusted for New Hampshire labor, not quotes.

How much does septic pumping cost in New Hampshire?

Roughly $250–$550 for a typical tank, more for 1,500 gallons or a buried lid.

Sources

  • https://www.homeadvisor.com/cost/plumbing/install-a-septic-tank/
  • https://www.angi.com/articles/what-does-it-cost-install-septic-system.htm
  • https://www.angi.com/articles/how-much-does-septic-tank-pumping-cost.htm
  • https://www.angi.com/articles/septic-inspection-cost.htm
  • https://www.bls.gov/oes/tables.htm (OEWS May 2025, plumbers, pipefitters and steamfitters, 47-2152)
  • https://www.epa.gov/septic/why-maintain-your-septic-system
  • https://sdmdataaccess.sc.egov.usda.gov/
  • https://regulations.justia.com/states/new-hampshire/env/subtitle-env-wq/chapter-env-wq-1000/part-env-wq-1010/section-env-wq-1010-01