Septic Tank Calculator

Home / Cost

Septic System Cost in Pennsylvania

Installation, pumping and inspection costs for Pennsylvania, adjusted for local labor, with Pennsylvania's tank size rule and what its soils mean for the system you will need.

Scales the labor share by the state's plumber wages.
A soil test decides which type your lot can use.

Estimated cost

Pennsylvania is selected. Choose the system type and press Estimate cost.

Installation cost in Pennsylvania

Pennsylvania plumbers earn an average of $37.05 an hour, against $34.70 nationally (BLS, May 2025). Applied to the labor share of the job, that puts Pennsylvania septic work 4% above the national average: a cost factor of 1.04.

System typeInstalled costWhere it is used
Conventional (gravity trench)$3,100–$8,350Soil that drains well, enough room
Chamber$5,200–$12,500High groundwater, scarce gravel, part-time use
Constructed wetland$5,200–$12,500Sites that need extra treatment
Sand filter$7,300–$18,750High water table, near lakes or streams
Drip distribution$8,350–$18,750Shallow soil, no room for a mound
Evapotranspiration$10,400–$15,600Dry, hot climates only
Aerobic treatment unit$10,400–$20,800Small lots, poor soil, sensitive water
Mound$10,400–$20,800Shallow soil, high water table, shallow rock

HomeAdvisor national ranges × 1.04. Perc test ($750–$1,900) and permits ($450–$2,300) are extra.

Tank size and tank cost

Pennsylvania requires at least 900 gal for a 3-bedroom home and 1,250 gal for 4 bedrooms. Tanks themselves are priced nationally: $900–$1,500 for 1,000 gallons and $1,500–$2,500 for 1,500, before delivery and setting.

Pennsylvania tank size rules

Pumping and inspection in Pennsylvania

TankPumping cost
750 gal$250–$550
1,000 gal$350–$750
1,250 gal$400–$950
1,500 gal$450–$1,150

A septic inspection runs about $200–$950. The EPA recommends an inspection every 1 to 3 years and pumping every 3 to 5 years.

How Pennsylvania soil affects the price

Across 64 USDA soil survey areas, 93% of rated land in Pennsylvania is very limited for a standard trench drain field, most often because of steep slopes. Lots on that ground usually need a larger field or an alternative system, which moves the budget from the conventional range toward $10,400–$20,800.

See the rating for your county

Common questions

How much does a septic system cost in Pennsylvania?

About $3,100–$8,350 for a conventional system and $10,400–$20,800 for a mound or aerobic unit, plus testing and permits. These are national figures adjusted for Pennsylvania labor, not quotes.

How much does septic pumping cost in Pennsylvania?

Roughly $300–$600 for a typical tank, more for 1,500 gallons or a buried lid.

Sources

  • https://www.homeadvisor.com/cost/plumbing/install-a-septic-tank/
  • https://www.angi.com/articles/what-does-it-cost-install-septic-system.htm
  • https://www.angi.com/articles/how-much-does-septic-tank-pumping-cost.htm
  • https://www.angi.com/articles/septic-inspection-cost.htm
  • https://www.bls.gov/oes/tables.htm (OEWS May 2025, plumbers, pipefitters and steamfitters, 47-2152)
  • https://www.epa.gov/septic/why-maintain-your-septic-system
  • https://sdmdataaccess.sc.egov.usda.gov/
  • https://law.cornell.edu/regulations/pennsylvania/25-Pa-Code-SS-73-31