Estimated cost
Rhode Island is selected. Choose the system type and press Estimate cost.
Installation cost in Rhode Island
Rhode Island plumbers earn an average of $39.23 an hour, against $34.70 nationally (BLS, May 2025). Applied to the labor share of the job, that puts Rhode Island septic work 8% above the national average: a cost factor of 1.08.
| System type | Installed cost | Where it is used |
|---|---|---|
| Conventional (gravity trench) | $3,250–$8,600 | Soil that drains well, enough room |
| Chamber | $5,400–$12,950 | High groundwater, scarce gravel, part-time use |
| Constructed wetland | $5,400–$12,950 | Sites that need extra treatment |
| Sand filter | $7,550–$19,400 | High water table, near lakes or streams |
| Drip distribution | $8,600–$19,400 | Shallow soil, no room for a mound |
| Evapotranspiration | $10,800–$16,150 | Dry, hot climates only |
| Aerobic treatment unit | $10,800–$21,550 | Small lots, poor soil, sensitive water |
| Mound | $10,800–$21,550 | Shallow soil, high water table, shallow rock |
HomeAdvisor national ranges × 1.08. Perc test ($750–$1,900) and permits ($450–$2,300) are extra.
Tank size and tank cost
Rhode Island requires at least 1,000 gal for a 3-bedroom home and 1,250 gal for 4 bedrooms. Tanks themselves are priced nationally: $900–$1,500 for 1,000 gallons and $1,500–$2,500 for 1,500, before delivery and setting.
Pumping and inspection in Rhode Island
| Tank | Pumping cost |
|---|---|
| 750 gal | $250–$600 |
| 1,000 gal | $350–$750 |
| 1,250 gal | $400–$950 |
| 1,500 gal | $500–$1,200 |
A septic inspection runs about $200–$950. The EPA recommends an inspection every 1 to 3 years and pumping every 3 to 5 years.
How Rhode Island soil affects the price
Across 1 USDA soil survey areas, 89% of rated land in Rhode Island is very limited for a standard trench drain field, most often because of drains too fast. Lots on that ground usually need a larger field or an alternative system, which moves the budget from the conventional range toward $10,800–$21,550.
Common questions
How much does a septic system cost in Rhode Island?
About $3,250–$8,600 for a conventional system and $10,800–$21,550 for a mound or aerobic unit, plus testing and permits. These are national figures adjusted for Rhode Island labor, not quotes.
How much does septic pumping cost in Rhode Island?
Roughly $300–$600 for a typical tank, more for 1,500 gallons or a buried lid.
Related pages
Sources
- https://www.homeadvisor.com/cost/plumbing/install-a-septic-tank/
- https://www.angi.com/articles/what-does-it-cost-install-septic-system.htm
- https://www.angi.com/articles/how-much-does-septic-tank-pumping-cost.htm
- https://www.angi.com/articles/septic-inspection-cost.htm
- https://www.bls.gov/oes/tables.htm (OEWS May 2025, plumbers, pipefitters and steamfitters, 47-2152)
- https://www.epa.gov/septic/why-maintain-your-septic-system
- https://sdmdataaccess.sc.egov.usda.gov/
- https://d1tvxue8o4w0fl.cloudfront.net/regulation/rhode-island-administrative-code/title-250-department-of-environmental-management/chapter-150-water-resources/subchapter-10-wastewater-and-storm-water/part-6-rules-establishing-minimum-standards-relating-to-location-design-construction-and-maintenance-of-onsite-wastewater-treatment-systems/section-250-ricr-150-10-627-septic-tanks