Septic Tank Calculator

Home / Cost

Septic System Cost in Utah

Installation, pumping and inspection costs for Utah, adjusted for local labor, with Utah's tank size rule and what its soils mean for the system you will need.

Scales the labor share by the state's plumber wages.
A soil test decides which type your lot can use.

Estimated cost

Utah is selected. Choose the system type and press Estimate cost.

Installation cost in Utah

Utah plumbers earn an average of $30.87 an hour, against $34.70 nationally (BLS, May 2025). Applied to the labor share of the job, that puts Utah septic work 7% below the national average: a cost factor of 0.93.

System typeInstalled costWhere it is used
Conventional (gravity trench)$2,800–$7,450Soil that drains well, enough room
Chamber$4,650–$11,200High groundwater, scarce gravel, part-time use
Constructed wetland$4,650–$11,200Sites that need extra treatment
Sand filter$6,550–$16,800High water table, near lakes or streams
Drip distribution$7,450–$16,800Shallow soil, no room for a mound
Evapotranspiration$9,350–$14,000Dry, hot climates only
Aerobic treatment unit$9,350–$18,700Small lots, poor soil, sensitive water
Mound$9,350–$18,700Shallow soil, high water table, shallow rock

HomeAdvisor national ranges × 0.93. Perc test ($750–$1,900) and permits ($450–$2,300) are extra.

Tank size and tank cost

Utah requires at least 1,000 gal for a 3-bedroom home and 1,250 gal for 4 bedrooms. Tanks themselves are priced nationally: $900–$1,500 for 1,000 gallons and $1,500–$2,500 for 1,500, before delivery and setting.

Utah tank size rules

Pumping and inspection in Utah

TankPumping cost
750 gal$250–$500
1,000 gal$300–$650
1,250 gal$350–$850
1,500 gal$400–$1,050

A septic inspection runs about $200–$850. The EPA recommends an inspection every 1 to 3 years and pumping every 3 to 5 years.

How Utah soil affects the price

Across 17 USDA soil survey areas, 85% of rated land in Utah is very limited for a standard trench drain field, most often because of slow-draining subsoil. Lots on that ground usually need a larger field or an alternative system, which moves the budget from the conventional range toward $9,350–$18,700.

See the rating for your county

Common questions

How much does a septic system cost in Utah?

About $2,800–$7,450 for a conventional system and $9,350–$18,700 for a mound or aerobic unit, plus testing and permits. These are national figures adjusted for Utah labor, not quotes.

How much does septic pumping cost in Utah?

Roughly $250–$500 for a typical tank, more for 1,500 gallons or a buried lid.

Sources

  • https://www.homeadvisor.com/cost/plumbing/install-a-septic-tank/
  • https://www.angi.com/articles/what-does-it-cost-install-septic-system.htm
  • https://www.angi.com/articles/how-much-does-septic-tank-pumping-cost.htm
  • https://www.angi.com/articles/septic-inspection-cost.htm
  • https://www.bls.gov/oes/tables.htm (OEWS May 2025, plumbers, pipefitters and steamfitters, 47-2152)
  • https://www.epa.gov/septic/why-maintain-your-septic-system
  • https://sdmdataaccess.sc.egov.usda.gov/
  • https://www.law.cornell.edu/regulations/utah/Utah-Admin-Code-R317-4-6