Septic Tank Calculator

Home / Cost

Septic System Cost in Washington

Installation, pumping and inspection costs for Washington, adjusted for local labor, with Washington's tank size rule and what its soils mean for the system you will need.

Scales the labor share by the state's plumber wages.
A soil test decides which type your lot can use.

Estimated cost

Washington is selected. Choose the system type and press Estimate cost.

Installation cost in Washington

Washington plumbers earn an average of $42.69 an hour, against $34.70 nationally (BLS, May 2025). Applied to the labor share of the job, that puts Washington septic work 14% above the national average: a cost factor of 1.14.

System typeInstalled costWhere it is used
Conventional (gravity trench)$3,400–$9,100Soil that drains well, enough room
Chamber$5,700–$13,650High groundwater, scarce gravel, part-time use
Constructed wetland$5,700–$13,650Sites that need extra treatment
Sand filter$7,950–$20,500High water table, near lakes or streams
Drip distribution$9,100–$20,500Shallow soil, no room for a mound
Evapotranspiration$11,400–$17,050Dry, hot climates only
Aerobic treatment unit$11,400–$22,750Small lots, poor soil, sensitive water
Mound$11,400–$22,750Shallow soil, high water table, shallow rock

HomeAdvisor national ranges × 1.14. Perc test ($750–$1,900) and permits ($450–$2,300) are extra.

Tank size and tank cost

Washington requires at least 1,000 gal for a 3-bedroom home and 1,000 gal for 4 bedrooms. Tanks themselves are priced nationally: $900–$1,500 for 1,000 gallons and $1,500–$2,500 for 1,500, before delivery and setting.

Washington tank size rules

Pumping and inspection in Washington

TankPumping cost
750 gal$300–$650
1,000 gal$350–$800
1,250 gal$450–$1,000
1,500 gal$500–$1,250

A septic inspection runs about $250–$1,000. The EPA recommends an inspection every 1 to 3 years and pumping every 3 to 5 years.

How Washington soil affects the price

Across 39 USDA soil survey areas, 86% of rated land in Washington is very limited for a standard trench drain field, most often because of slow-draining subsoil. Lots on that ground usually need a larger field or an alternative system, which moves the budget from the conventional range toward $11,400–$22,750.

See the rating for your county

Common questions

How much does a septic system cost in Washington?

About $3,400–$9,100 for a conventional system and $11,400–$22,750 for a mound or aerobic unit, plus testing and permits. These are national figures adjusted for Washington labor, not quotes.

How much does septic pumping cost in Washington?

Roughly $350–$650 for a typical tank, more for 1,500 gallons or a buried lid.

Sources

  • https://www.homeadvisor.com/cost/plumbing/install-a-septic-tank/
  • https://www.angi.com/articles/what-does-it-cost-install-septic-system.htm
  • https://www.angi.com/articles/how-much-does-septic-tank-pumping-cost.htm
  • https://www.angi.com/articles/septic-inspection-cost.htm
  • https://www.bls.gov/oes/tables.htm (OEWS May 2025, plumbers, pipefitters and steamfitters, 47-2152)
  • https://www.epa.gov/septic/why-maintain-your-septic-system
  • https://sdmdataaccess.sc.egov.usda.gov/
  • https://lawfilesext.leg.wa.gov/Law/WAC/WAC%20246%20%20TITLE/WAC%20246%20-272A%20CHAPTER/WAC%20246%20-272A-0232.htm